Sensing & Control
Showing the single result
AMPHENOL_AN6N4-GC11KA143L/37C_NTC_MEDICAL_SENSOR
From£46.95(Ex. VAT)
Enquire for availability
Make an Enquiry
Holtek HT9170B / HT9170D DTMF Receiver
From£0.60(Ex. VAT)
Holtek HT9170B / HT9170D DTMF Receiver
XProduct SKU: HT9170D-18SLF-P
Holtek HT9170B / HT9170D DTMF Receiver
The HT9170B/D are Dual Tone Multi Frequency (DTMF) receivers integrated with digital decoder and bandsplit filter functions as well as power-down mode and inhibit mode operations. Such devices use digital counting techniques to detect and decode all the 16 DTMF tone pairs into a 4-bit code output. Highly accurate switched capacitor filters are implemented to divide tone signals into low and high group signals. A built-in dial tone rejection circuit is provided to eliminate the need for pre-filtering.Features
- Operating voltage: 2.5V~5.5V - Minimal external components - No external filter is required - Low standby current (on power down mode) - Excellent performance - Tristate data output for MCU interface - 3.58MHz crystal or ceramic resonator - 1633Hz can be inhibited by the INH pin - HT9170B: 18-pin DIP package HT9170D: 18-pin SOP packageFrom£0.60(Ex. VAT)
6510 In stock
Make an Enquiry
Holtek HT9200A / HT9200B DTMF Generators
From£0.50(Ex. VAT)
Holtek HT9200A / HT9200B DTMF Generators
XProduct SKU: HT9200A-8SLF-P
Holtek HT9200A/HT9200B DTMF Generators
General Description The HT9200A/B tone generators are designed for MCU interfaces. They can be instructed by a MCU to generate 16 dual tones and 8 single tones from the DTMF pin. The HT9200A provides a serial mode whereas the HT9200B contains a selectable serial/parallel mode interface for various applications such as security systems, home automation, remote control through telephone lines, communication systems, etc.Features
Features · Operating voltage: 2.5V~5.5V · Serial mode for the HT9200A · Serial/parallel mode for the HT9200B · Low standby current · Low total harmonic distortion · 3.58MHz crystal or ceramic resonator · HT9200A: 8-pin SOP package - HT9200B: 14-pin SOP packageFrom£0.50(Ex. VAT)
8500 In stock
Make an Enquiry
Microchip DAC
From£2.37(Ex. VAT)
Enquire for availability
Make an Enquiry
Microchip DAC MCP4726
From£0.78(Ex. VAT)
Enquire for availability
Make an Enquiry
Microchip PIC24FV16
From£2.59(Ex. VAT)
Enquire for availability
Make an Enquiry
Sensolute Micro Vibration Sensor MVS0409.02
From£1.50(Ex. VAT)
Sensolute Micro Vibration Sensor MVS0409.02
XProduct SKU: MVS0409.02
Sensolute Micro Vibration Sensor MVS0409.02
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up – low powerFeatures
-Omnidirectional vibration sensor - Halogen free - Wide supply voltage range: 1.80 V to 15 V - Low operating current -e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) -e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 ? - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -40 °C to +85 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgFrom£1.50(Ex. VAT)
186 In stock
Make an Enquiry
Sensolute Micro Vibration Sensor MVS0608.02
From£1.50(Ex. VAT)
Sensolute Micro Vibration Sensor MVS0608.02
XProduct SKU: MVS0608.02
Sensolute Micro Vibration Sensor MVS0608.02
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up - low powerFeatures
- Omnidirectional vibration sensor - Wide supply voltage range: 1.80 V to 15 V - Low operating current (e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) (e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 Ohm - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -20 °C to +70 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgFrom£1.50(Ex. VAT)
Enquire for availability
Make an Enquiry
Sensolute Micro Vibration Sensor MVS1006.01
From£1.50(Ex. VAT)
Sensolute Micro Vibration Sensor MVS1006.01
XProduct SKU: MVS1006.01
Sensolute Micro Vibration Sensor MVS1006.01
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up – low powerFeatures
- Unidirectional vibration sensor - Wide supply voltage range: 1.80 V to 15 V - Low operating current (e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) (e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 ? - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -20 °C to +70 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgFrom£1.50(Ex. VAT)
Enquire for availability
Make an Enquiry
Solsta Systems Solutions – Adeunis Comfort Temperature and Humidity
From£145.00(Ex. VAT)
Solsta Systems Solutions - Adeunis Comfort Temperature and Humidity
XProduct SKU: ARF8275AA-COMFORT
Adeunis Comfort:Temperature & Humidity Monitors both temperature and humidity in a building. Fully optimizing occupant comfort and energy performance. This item also has an integrated alert button to trigger. Utilised in any building or area containing sensitive equipment
Features
1 digital input 1 connected button Periodic and / or event mode Configurable life frame Timestamp Network test at startup Personalisation of the joint phase Redundancy Alarm repetition Local and remote configuration Product error alert, configuration error, low battery Dimensions: 111 x 61 x 40 mm Weight: 102g Case: IP20 (indoor use) Operating temperature range: -20°C /+60°C Integrated fixing system: wall or laid Interchangeable batteryFrom£145.00(Ex. VAT)
5 In stock
Make an Enquiry
Solsta Systems Solutions – Adeunis Modbus
From£310.00(Ex. VAT)
1 In stock
Make an Enquiry
Solsta Systems Solutions – Adeunis Motion Sensor Presence and Brightness
From£160.00(Ex. VAT)
Solsta Systems Solutions - Adeunis Motion Sensor Presence and Brightness
XProduct SKU: ARF8276AA-MOTION
Adeunis Motion: Presence / Brightness The main functions of this product are; presence, luminosity, alert button and dry contact input. This item is designed for the monitoring of the occupancy rate of a room · the brightness rate · Count the number of events on the alert button or the dry contact input There is also an integrated alert button that can be used to trigger. Examples of where this can be used are when measuring occupancy in a meeting room and also to monitor the lighting in a room.
Features
Periodic and / or event mode Interchangeable battery Dimensions: 111 x 61 x 40 mm Case: IP20 (indoor use) Integrated fixing system: wall or laid Zone: Sigfox RC1, LoRaWAN® EU863-870 Operating Temperature Range: -20°C /+60°C Local and remote configuration Weight: 102g Standard: Directive 2014/53/UE (RED) Product error alert, configuration error, low battery Configurable life frame 1 digital input 1 connected buttonFrom£160.00(Ex. VAT)
6 In stock
Make an Enquiry