Microchip
40 Results
Enquire for availability
Make an EnquiryFrom£175.00(Ex. VAT)
Enquire for availability
Make an EnquiryFrom£92.25(Ex. VAT)
10 In stock
Make an Enquiry
Microchip - PoE Outdoor Surge Protector
XProduct SKU: PD-OUT/SP11
Microsemi single and multiport midspans are an economical and easy way to power popular devices such as WLAN access points, IP video phones, IP security cameras, security access devices, thin clients and printers over new or existing Ethernet infrastructure. The PD-OUT-SP11 is a high quality surge protection device designed to protect indoor Ethernet networks from lighting that may come from the outdoor environment through the Ethernet cable. The product is enclosed in a metal weatherproof enclosure, meeting IP66. It can be easily mounted on a wall or a pole. The SP device can be installed before the cable enters the building to protect the indoor network or immediately adjacent to the wall- or pole-mounted outdoor device (i.e. WLAN AP, IP Camera, etc). Features - Supports data rates of up to 1Gbps - All eight lines protected including PoE - Waterproof (IP66) - Can be wall or pole mounted - Surge Handling Capability: 10kV, 5kA to ground in 80/20us; 800V, 100A PoE - Regulatory Compliance: REACH, RoHS, WEEE, IEC60529 level IP66, NEMA 250, level 4x - Surge Compliance: IEC61643-21, GR1089, ITU-T K.45 - Safety Approvals: UL 497B
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip - Power-over-Ethernet Controller ICs
XProduct SKU: PD70211ILQ-TR-P
PD70211 is an advanced PD Interface IC with integrated switching (PWM) regulator control for Powered Devices in PoE applications. It supports IEEE802.3af, IEEE802at, HDBaseT and general 2/4-pair configurations. The PD70211 front-end includes an advanced classification block that supports 2, 3, 4, and 6 event classification. Using the SUPP_Sx pins, it also identifies which of the four pairs of the cable actually receives power and generates appropriate flags. The IC features an internal bleeder for discharging the input capacitor of the DC/DC converter rapidly, so as to ensure fast re-detection and port power-up in case of sudden removal and re-insertion of the Ethernet cable into the RJ-45. The advanced PWM current mode section supports synchronous Flyback and Active clamp Forward topologies, as well as Buck, Boost etc... Features•Supports IEEE802.3af/at, HDBaseT and other 2-pair/4-pair configurations •Wall-adapter support (Rear Aux method) •PD detection & programmable classification •2,3,4, and 6 event classification •Integrated 0.3? isolating (series-pass) FET •Inrush current limiting •Less than 10?A offset current during detection •Advanced PWM section •Lead-free MLPQ-36 (6 × 6 mm) package
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryFrom£16.50(Ex. VAT)
5 In stock
Make an Enquiry
Microchip - SmartFusion 2 Family
XProduct SKU: M2S090TS-EVAL-KIT-P
Microsemi's SmartFusion2 Security Evaluation Kit makes it easy to develop secure embedded systems and provides the best-in-world solutions for both Design Security—when protecting your design IP is critical; and Data Security—when protecting application data is necessary. The kit provides a cost effective SoC field programmable gate array (FPGA) platform for developing cost-optimized SoC FPGA designs using Microsemi's SmartFusion2 SoC FPGAs, which integrate inherently reliable flash-based FPGA fabric, a 166 MHz ARM® Cortex®-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM, and industry-required high-performance communication interfaces—all on a single chip. In addition, the SmartFusion2 Security Evaluation comes with a large 90K LE device to make it easy to develop transceiver I/O-based FPGA designs to build PCI Express® and Gigabit Ethernet-based systems and also have room for large IP blocks to complement the design. The board is also small form-factor PCIe compliant, which will allow quick prototyping and evaluation using any desktop PC or laptop with a PCIe slot. The kit enables you to: • Evaluate the Data Security features of SmartFusion2 SoC FPGAs including: – Elliptic Curve Cryptography (ECC) – SRAM-PUF (Physically Unclonable Function) – Random Number Generator (RNG) – AES/SHA – Anti-Tamper • Develop and test PCI Express Gen2 x1 lane designs • Test the signal quality of the FPGA transceiver using full-duplex SERDES SMA Pairs • Measure the low power consumption of the SmartFusion2 SoC FPGA • Quickly create a working PCIe link with the included PCIe Control Plane Demo The board includes an RJ45 interface to 10/100/1000 Ethernet, 512 MB of LPDDR, 64 MB SPI Flash, and USB-UART connections, as well as I2C, SPI, and GPIO headers. The kit includes a 12 V power adapter, but can also be powered through the PCIe edge connector. Also included is a free Platinum License for the Libero SoC software toolset to enable FPGA development and to utilize the reference designs made available with the kit.
Features
Kit Contents: 1x SmartFusion®2 system-on-chip (SoC) FPGA 90K LE M2S090TS-FGG484 Evaluation Board 1x USB A male to micro-B male cable 1x 12 V, 2 A AC power adapter 1x Quickstart guide 1x Libero® System-on-Chip (SoC) Platinum software one year license 1x FlashPro4 programmerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Microchip - SmartFusion Family
XProduct SKU: A2F-EVAL-KIT-2
SmartFusion® System on Chip (SoC) FPGAs are the only devices that integrate an FPGA fabric, ARM Cortex-M3 Processor, and programmable analog circuitry, offering the benefits of full customization and IP protection, while still being easy to use. Based on a proprietary flash process, SmartFusion SoC FPGAs are ideal for hardware and embedded designers who need a true system-on-chip (SoC) solution that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs. SmartFusion SoC FPGAs provide you with: Full Design Customisability. - Create a product with exactly the features you need - Innovate and differentiate for a competitive edge - Incorporate last-minute changes with an on-chip FPGA fabric - Future-proof your design with in-application programming (IAP) capability for field upgrades - Experiment with hardware acceleration for select algorithms in FPGA fabric Intellectual Property (IP) Protection - Inherent flash FPGA IP security with a complete SoC - Snoop-free interface between microcontroller and FPGA - High design security since no bitstream download is required at power-up - Secure in-system programming (ISP) with 128-bit Advanced Encryption Standard (AES) via JTAG - FlashLock ® to prevent FPGA contents from being read back - Protection against overbuilding with customer programmable device key Ease-of-Use Increases Productivity - A single platform for your entire line of products - Libero SoC integrated design environment for both FPGA and embedded designers - Simple GUI-based configuration of complex programmable analog - Industry leading compile and debug from Keil™, IAR Systems® and GNU - Micrium supports SmartFusion devices with real time operating system (RTOS) and middleware components
Features
Microcontroller Subsystem (MSS) - Hardware industry-standard 100 MHz, 32-bit ARM Cortex-M3 CPU - Multi-layer AHB communication matrix with up to 16 Gbps throughput - 10/100 Ethernet MAC with RMII interface - Two of each: SPI, I2C, UART, 32-bit timers - Up to 512 KB flash and 64 KB of SRAM - External memory controller (EMC) - 8-channel DMA controller - Up to 41 MSS I/Os with Schmitt trigger inputs - 25 I/Os can be used as FPGA I/Os FPGA Fabric - Based on Microsemi's proven ProASIC3 architecture - 60,000 to 500,000 system gates with 350 MHz system performance - Embedded SRAMs and FIFOs - Variable aspect ratio 4,608-bit SRAM blocks - x1, x2, x4, x9 and x18 organizations - True dual-port SRAM (including x18) - Up to 128 FPGA I/Os supporting LVDS, PCI, PCI-X and LVTTL/LVCMOS standards Programmable Analog - High-performance analog signal conditioning blocks (SCB) with voltage, current and temperature monitors - Analog compute engine (ACE) offloads CPU from analog initialization and processing of analog-to-digital conversion (ADC), digital-to-analog conversion (DAC) and SCBs - Integrated ADCs and DACs with 1 percent accuracy - 12-/10-/8-bit mode ADCs with 500/550/600 Ksps sampling rate - Up to ten 15 ns high-speed comparators - Up to 32 analog inputs and 3 outputsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
From£115.25(Ex. VAT)
Microchip - WLR089 LoRa Module & Evaluation Board
XProduct SKU: EV23M25A
The WLR089 Xplained Pro is a hardware platform designed to evaluate the WLR089U0 LoRa modules. The WLR089U0 modules are FCC, IC and RED certified. The WLR089 kit is not only an evaluation platform but also an excellent reference design for developing SAMR34/35 based LoRa end-node applications. This kit is supported by the Atmel Studio, an integrated development platform, which provides predefined application examples. The kit also provides easy access to various features of the WLR089U0 module and ATSAMR34J18B device and offers additional peripherals to extend the features of the board and ease the development of custom designs.
Features
Features ultra-low power WLr089U0 LoRa module with support for 862 - 1020 MHz. Dual-mode Frequency Operation On-board debugger (EDBG) eliminates the need for external debugger Two extension headers for signal breakout and expansion boards On-board power management system with current monitoring XPRO current measurement system data visualizer support On-board TCXO for optimal performance at long range External Whip Antenna with u.FL included Manual Reset Button and GPIO Button Indicator LEDs for Status and Power Auxiliary 10-Pin Cortex Programming Header Supported by Studio 7 Integrated Development Platform and software examples in Advanced Software Framework (ASF)From£115.25(Ex. VAT)
2 In stock
Make an EnquiryFrom£195.00(Ex. VAT)
4 In stock
Make an EnquiryFrom£2.37(Ex. VAT)
Enquire for availability
Make an EnquiryFrom£0.78(Ex. VAT)
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip IGLOO®2 FPGA Family
XProduct SKU: M2GL-EVAL-KIT-P
Microsemi's IGLOO®2 FPGAs, targeted at the cost-optimized FPGA market, integrate fourth generation flash-based FPGA fabric and high performance communications interfaces on a single chip. The IGLOO2 FPGAs offer a cost optimized FPGA with best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry. Best-In-Class: Integration, Power, Reliability & Security Microsemi Leadership in Cost-Optimized FPGAs - Highest number of 5G transceivers - Highest number of GPIO - Highest number of PCI Compliant 3.3V I/O - Only FPGA with hardened memory subsystem - Only non-volatile and instant-on mainstream FPGA Microsemi Leadership in Low Power FPGAs - 3X lower static power with no performance penalties - Flash*Freeze real-time power management - 25% lower total power Microsemi Leadership in Reliable FPGAs - Only FPGA with SEU immune fabric configuration cells - Extended temperature support (Up to 125degC Tj) Microsemi Leadership in Secure FPGAs - Built-in state-of-the-art design security for all devices - Easy-to-use!
Features
Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost optimized FPGA markets by providing a LUT based fabric, 5G transceivers, high speed GPIO, block RAM and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to 5X more logic density and 3X more fabric performance than its predecessors and combines a non-volatile Flash based fabric with the highest number of general purpose I/O, 5G SERDES interfaces and PCI Express end points when compared to other products in its classCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an EnquiryFrom£2.15(Ex. VAT)
135 In stock
Make an EnquiryFrom£2.20(Ex. VAT)
Enquire for availability
Make an Enquiry