Other Brands
21 Results
From£64.62(Ex. VAT)
Bluetooth Wireless Sensor
XProduct SKU: 5906660327028-P
- Measurement range: -35°C to 70°C - Accuracy up to 0.4°C in the -20°C to +70°C range; 0.5°C in the -35°C to -20°C range
From£64.62(Ex. VAT)
4 In stock
Enquire about this product
Caspian M12 Series
XProduct SKU: CASPIAN M12-316-3.7-P
This Caspian module integrates a fixed lens module and an Arctic 316 variable focus liquid lens in an M12 receptacle (S-mount). The module is built-in with an FPC cable, and can be connected to a standard 1 mm pitch FPC connector. It can therefore be very easily integrated in a standard M12 sensor board. The module is compatible with most imaging sensor formats, up to 1/3'' diagonal. This module can be driven by the same drivers as the Arctic 316 lens. Key features - M12x0.5 thread - Flex Cable compatible with FCI connector SFW4S-2ST_E9LF - Built-in AutoFocus actuator from 7 cm to infinity - Optional built-in IR filter (part number: Caspian M12-316-3.7-IR) Ordering Information - Caspian M12-316-3.7 : Bent FPC, no IR-cut filter - Caspian M12-316-3.7-IR : Bent FPC, built-in IR-cut filter
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
From£190.00(Ex. VAT)
Enquire for availability
Enquire about this productEnquire for availability
Enquire about this product
GSI SigmaQuad II SRAM Series
XProduct SKU: GS8662D18BD-250I-P
SigmaQuad™ SRAMs SigmaQuad SRAMs are synchronous memories with separate read and write data buses. “Quad” refers to their ability to transfer 4 beats of data (2 beats per data bus) in a single clock cycle. SigmaDDR™ SRAMs SigmaDDR SRAMs are synchronous memories with a common read and write data bus. “DDR” refers to their ability to transfer 2 beats of data on the data bus in a single clock cycle. GSI’s SigmaQuad and SigmaDDR devices are compatible with all competitor Quad Data Rate and Double Data Rate SRAMs, respectively. Features • 1.1G memory transactions per second (SigmaQuad-II+™) • Extensive range of design options—Quad & Double Data Rates, 1.5–2.5 cycle Read Latencies, 2- and 4-word data bursts • User-configurable signal termination and output drive settings • Densities for every performance point—18Mbit up to 288Mbit • Constructed using foundry-standard CMOS and 165-bump BGA packaging (both leaded and RoHS-compliant options)
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
From£250.00(Ex. VAT)
Mesh Network IoT Dev Kit
XProduct SKU: DS-IOT-01
Mesh Network Development Kit / Set for IoT This development set enables you to build your complete IoT solution from sensors and actuators through a gateway - up to different clouds and mobile apps in a matter of hours. You will be able to extend your network with ready IQRF interoperable devices and use your solution for proof-of-concept projects. This set provides a wireless network based on IQRF mesh technology. It includes: > Sensors for temperature, light intensity, voltage measurement > Relay kit > IQRF programmer & debugger > Transceivers > IQRF coordinator adapter for the UP board > Connectors and cables > Software UP Board and power adapter; UP board: 2GB RAM, 32GB eMMC- when fitted with the IQRF coordinator from the Development Set, provides a gateway to cloud services. Preinstalled software: No. Products Included in this Kit/Set: DCTR-72DAT (IQRF transceiver) CK-USB-04A (IQRF programmer, debugger and TR host with USB connectivity) DK-EVAL-04A (Universal portable development kit for TR transceivers, TR host) DDC-SE-01 (IQRF evaluation and development kit with sensors) DDC-RE-01 (IQRF evaluation and development kit with relays) KON-RASP-01 (Adapter to connect IQRF transceiver to Raspberry Pi or alternatives) CAB-USBABMICRO (Micro USB cable 18.5 cm) USB flash drive (Software and documentation - including Custom DPA handlers and IQRF IDE with specialized macros)
From£250.00(Ex. VAT)
2 In stock
Enquire about this productFrom£140.00(Ex. VAT)
1 In stock
Enquire about this product
RC1682 868MHz Module w/ SIGFOX protocol
XProduct SKU: RC1682-SIG-DK-P
Overview coming soon - Call 01527 830800 for information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
RC1682 868MHz Module w/ SIGFOX protocol
XProduct SKU: RC1692HP-SIG-P
Overview coming soon - Call 01527 830800 for information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
RC1682 868MHz Module w/ SIGFOX protocol
XProduct SKU: RC1682-SIG-P
The RC1682-SIGFOX module is a compact surface-mounted product that measures only 12.7 x 25.4 x 3.3 mm. The module contains a communication controller with embedded SIGFOX protocol software and is pre-certified for operation under the European regulations. Custom variants can be offered with custom functionalities. Applications: - Internet of Things - Long range sensor applications - Asset tracking and monitoring - Telemetry stations - Fleet management Features: - SIGFOX compatibility (IoT) - Long range, high reliability - Ultra narrowband, high-performance radio - High sensitivity and high selectivity - High blocking properties - Completely shielded module - Pin compatible with other RC17xx or RC17xxHP products from Radiocrafts - 12.7 x 25.4 x 3.3 mm compact module for SMD mounting - 2.8 – 3.8 V supply voltage - Ultra low power modes - Conforms with EU R&TTE directive (EN 300 220, EN 301 489, EN 60950)
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
RF 868MHz Low Power Module
XProduct SKU: RC1180-RC232
The RC11XX-RC232 RF Transceiver Modules are compact surface-mounted high performance modules for FSK operation with embedded protocol. The modules are completely shielded and pre-certified for operation under the European radio regulations for license-free use. RC1170- and RC1190-RC232 conforms with regulations for operation under FCC (USA and Canada) and under the directives given by G.S.R. (India) respectively.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Enquire about this product
From£22.00(Ex. VAT)
SparkLan - AD6212SD Combo WIFI + Bluetooth Module
XProduct SKU: AP6212SD-P
AP6212SD is 11b/g/n 1T1R WiFi +Bluetooth 4.1 WiFi module. It's a highly integrated single-chip solution and provides the highest level of integration for a mobile or handheld wireless systems. The WiFi module is designed to address the needs of highly portable devices that require minimal power consumption and compact size. It implements the world's most advanced Enhanced Collaborative Coexistence algorithms and hardware mechanisms, allowing for an extremely collaborative WLAN and Bluetooth coexistence. AP6212SD can support AP+Station mode at the same time. It can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. The integrated module provides SDIO interface for WiFi, UART / I2S / PCM interface for Bluetooth.
From£22.00(Ex. VAT)
Enquire for availability
Enquire about this productFrom£170.00(Ex. VAT)
Enquire for availability
Enquire about this product
From£36.20(Ex. VAT)
SparkLan - Dual Band Wifi 5+BT 5
XProduct SKU: WUBQ-159ACN(BT)(M7)
AP6212SD is 11b/g/n 1T1R WiFi +Bluetooth 4.1 WiFi module. It's a highly integrated single-chip solution and provides the highest level of integration for a mobile or handheld wireless systems. The WiFi module is designed to address the needs of highly portable devices that require minimal power consumption and compact size. It implements the world's most advanced Enhanced Collaborative Coexistence algorithms and hardware mechanisms, allowing for an extremely collaborative WLAN and Bluetooth coexistence. AP6212SD can support AP+Station mode at the same time. It can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. The integrated module provides SDIO interface for WiFi, UART / I2S / PCM interface for Bluetooth.
From£36.20(Ex. VAT)
25 In stock
Enquire about this product
SparkLan - I-pex/MH4 to RPSMA(F) 150mm RF cable
XProduct SKU: CBIRF-NE150
MHF4 is a miniature RF connector for mini PCI Express Module that commonly used for M.2 (NGFF) Module which requires the I-PEX/MHF4 connector. The RP-SMA Female connector is compliant for all types of wireless antennas including WIFI networks, also have a reliable characteristic with long life-span, performance is excellent, high frequency.
CONTACT US FOR VOLUME PRICING
380 In stock
Enquire about this product
From£12.99(Ex. VAT)
TR-72 Transceiver
XProduct SKU: TR72-D-P
TR-72D RF Transceiver Module Series TR-72D is a family of IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional on-board antenna requires no external components. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time. Optional DPA framework supports applications even without programming. Key features of this series include; > Operating system (upgradeable at the user) > DPA framework for Data controlled approach > GFSK modulation > Selectable RF band 868 / 916 MHz, multiple channel > RF output power 10 mW > MCU with extended resources, user interrupt capability > Extra low power consumption, power management modes > SPI interface supported by OS in background > Serial EEPROM 256 Kb > PWM output > Programmable HW timer > +3 V LDO regulator output, battery monitoring > 2 LEDs and 8 pins, 6 I/Os > A/D converter (2 channels), analog comparator > Options: on-board antenna, U.FL connector, temperature sensor > SIM card format fits KON-SIM-02 and KON-SIM-01 connectors > Shielding Can Applications where this Module best suit are; > Bidirectional RF communication > Point-to-point or network wireless connectivity > Telemetry, AMR (automatic meter reading) > WSN (wireless sensor network) > Building automation > Street lighting control > Wireless monitoring, control and regulation > Remote data acquisition > RF connectivity in many other fields > IoT (Internet of Things)
From£12.99(Ex. VAT)
Enquire for availability
Enquire about this product
From£12.42(Ex. VAT)
TR-75 Vertical Mounting Module
XProduct SKU: TR-75DA
TR-75D RF Transceiver Module 868MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and on-board antenna requires no external components. Vertical mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Extra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time. Optional DPA framework supports applications, even without programming. Key features include; > Operating System (upgradeable at the user) > DPA framework for Data controlled approach > GFSK modulation > Selectable RF band 868/916 MHz, multiple channel > RF output power 10 mW > MCU with extended resources, user interrupt capability > Extra low power consumption, power management modes > SPI interface supported by OS in background > Serial EEPROM 256 Kb > PWM output > Programmable HW timer > Battery monitoring > 12 pins (9 I/O pins, 1 input only pin) > A/D converter (3 channels) > Analog comparator > Vertical mounting, SIM card compatible > Shielding Can > Small Dimensions Applications where this item is best fit include; > Bidirectional RF communication > Point-to-point or network wireless connectivity > Telemetry, AMR (automatic meter reading) > WSN (wireless sensor network) > Building automation > Street lighting control > Wireless monitoring, control and regulation > Remote data acquisition > RF connectivity in many other fields > Also for municipal and indoor areas > Internet of Things
From£12.42(Ex. VAT)
Enquire for availability
Enquire about this product
TR-76 Surface Mount Module
XProduct SKU: TR-76D-P
TR-76D RF Transceiver Module Series TR-76D is a family of IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional on-board antenna requires no external components. SMT mounting and very small dimensions allow for space saving. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time. Optional DPA framework supports applications even without programming. Key features: > Operating system (upgradeable at the user), easy to use > DPA framework for Data controlled approach (formerly DCTR) > GFSK modulation > Selectable RF band 868 / 916 MHz, multiple channel > RF output power 10 mW > MCU with extended resources, user interrupt capability > Extra low power consumption, power management modes > SPI interface supported by OS in background > Serial EEPROM 256 Kb > PWM output > Programmable HW timer > Battery monitoring > 18 pins, 11 I/O pins,1 input only pin > A/D converter (4 channels), D/A converter, analog comparator > Options: on-board antenna or soldering antenna pad-hole > Stamp-hole pads, SMT mounting, compatible with SIM card connector without metallic holder (KON-SIM-02) > Shielding Can Applications: > Bidirectional RF Communication > Point-to-point or network wireless connectivity > Telemetry, AMR (automatic meter reading) > WSN (Wireless Sensor Network) > Building automation > Street lighting control > Wireless monitoring, control and regulation > Remote data acquisition > RF connectivity in many other fields > IoT (Internet of Things)
CONTACT US FOR VOLUME PRICING
7 In stock
Enquire about this product