Displays

SD-7075-A is an HDMI converter box to convert 4 channels of HDMI 2.0 to 1 channel of HDMI 2.1. It is useful for connecting to an HDMI 2.1 TV from a set top box or graphic board that has 4 channels of HDMI 2.0 output.

Features

* Converts HDMI 2.0 TMDS (4ch) to HDMI 2.1 FRL (1ch) * Supports DSC (Display Stream Compression) 1.2 * Supports HDCP 1.4 and 2.3 * EDID, SCDC and Link Training status are displayed on the front panel * LAN, RS-232C and GPIO (customized base) for external control Note : 1 : Frame rate and bit depth of output video are same as input video. In case of 8K/50p, 59.94p and 60p output, it becomes YCBCR 4:2:0 automatically. 2 : FRL output rate is determined according to the EDID of the HDMI Sink. If there is no EDID in the HDMI Sink, maximum FRL rate will be output. 3 : All 4 input channels should be connected to the Source.

Specifications

General Specifications HDMI: Dot Clock 25MHz to 2376MHz Color Format: RGB, YCBCR 4:4:4/4:2:2/4:2:0 Color Depth: 8, 10, 12-bit Audio Sampling Frequency: 32kHz to 192kHz (L-PCM 2 to 8ch) IEC60958, 61937 HDCP: Ver. 1.4/2.3 E-EDID: Ver. 1.4 (DDC2B) External Supplying Power : 5V /Max. 50mA Power Requirements: AC 100 - 240V Power Consumption: 100W MAX Dimensions: 330(W)x44(H)x250(D)mm (excluding protrusions) Weight: Approx. 2 kg

Converts 12G-SDl x 4ch to HDMI 2.1 FRL (8K/60p, 4K/120p, etc.)

Features

* Supports DSC (Display Stream Compression) 1.2 * Supports HDCP 1.4 and 2.3 * Simple signal generation function (Color Bar, audio 1kHz - 18dB) * 12G-SDI loop through connection * Monitoring function to check error of SDI input and payload ID * EDID, SCDC and Link Training status are displayed on the front panel * LAN, RS-232C and GPIO (customized base) for external control

Specifications

General Specifications Power Requirements: DC 12V Power Consumption: 100W MAX Dimensions: 210(W)×44(H)×350(D)mm(excluding protrusions) Weight: Approx. 2 kg

VA1847 enables analysis of HDMI2.1 video, audio, protocol and video timings in real time

Features

* Supports signal analysis and generation of FRL (Fixed Rate Link) with 4 lanes of up to 12Gbps signals and TMDS with 3 lanes of up to 6 Gbps signals. [CTA-861-G VIC (Video Identification Code)] * Supports maximum of 4K/120p YCBCR 4:2:2 and 8K/60p YCBCR 4:2:0 timings. (10K timings are not supported. * Video, Audio, InfoFrame, HDCP (1.4, and 2.3), and SCDC analysis functions * Supports repeater function. HDMI protocol analysis of HDMI output devices is possible * Supports through fuction. DDC/CEC line analysis is possible without reciving video signal using a dedicated through cable.(Option) * Logging InfoFrame (like Dynamic Range) at each individual frame with time stamps * eARC receive/generate function,ARC receive fuction * EDID emulation and DDC/CEC monitoring function * New 12-inch touch panel LCD display (external mouse control also supported) * HDMI 2.1 CTS function * Three test modes for testing source, sync and repeater devices

VA-1849 is a source tester that supports HDMI 2.1 signal FRL (up to 12 Gbps/4 lanes) and TMDS. It supports the measurement and analysis of the source DUT by setting the control and each test item with commands via PC. It enables automated inspection on the production line and in the QC department.

Features

* Sink function: Video/audio timing, InfoFrame measurement, HDCP 1.4/2.3 authentication, and EDID/SCDC communication analysis. It supports up to 8K/60p YCBCR 4:2:0 and 4K/120p YCBCR 4:4:4 video signals in uncompressed mode. It supports up to 8K/60p YCBCR 4:4:4 video signals in compression (DSC) mode. It supports eARC output. * Testing function: By comparing the internal pattern with the input pattern, it is capable of measuring the protocol details such as bit drop and color defects, as well as automatic inspection for FRL link training (comparison inspection is supported up to 4K/60p). It is possible to confirm whether the packet data of the input signal matches the expected value. It is possible to confirm whether the input audio signal is within the allowable value. * Source function: Compatible with CTA-861-G and VESA Display Monitor Timing (DMT) compliant video signal output. Each parameter of the InfoFrame can be set. It supports eARC/ARC input. * External control: Supports sending and receiving commands such as measurement results and parameter settings via LAN, USB-TypeB and RS-232C. Original control software can be developed by the combination of commands. * Saving results and logs: Analysis data and test logs can be saved in a USB flash drive. [Pass/Fail Judgment of Comparative Test] Internal video patterns are created from the color palette, and inspection is performed by comparing them with the input video patterns. Error pixel values and colors with (X,Y) coordinates are displayed and the difference between A and B is analyzed. The color palette is 16 colors, and up to 3 lines of color information patterns can be registered for comparison.

Specifications

HDMI I/O Video: Dot Clock TMDS 25MHz~2376MHz?FRL 3G3L/6G3L/6G4L/8G4L/10G4L/12G4L Color Format RGB, YCBCR 4:4:4/4:2:2/4:2:0* *YCBCR4:2:0 does not support comparison checking of video data. Color Depth 8, 10, 12 bit Audio Sampling Frequency 32kHz~192kHz (L-PCM 2~8ch) Format IEC 60958?61937 Data Resolution 16, 20, 24bit EDID Ver.1.4 (DDC2B) HDCP Ver.1.4/2.3 eARC Input, output (Only ch2) ARC Input Number of Ports 2 inputs, 1 output*. *In case of two inputs at the same time, select one of the two. Unable to use input/output feature simultaneously with one unit. External Control: USB: Type A Used to connect a USB flash drive. (not included.) Type B Connect to computer and control is carried out via terminal commands LAN : Connect to computer and control is carried out via terminal commands RS-232C: Connect to computer and control is carried out via terminal commands

12G SDI video signal generator supports: Timing Formats · 12G-SDI Quad-Link 8K 60/59.94p YCbCr 4:2:2 10 bits (SMPTE 2082-12) · 12G-SDI Dual-Link 8K 30/29.97p YCbCr 4:2:2 10 bits (SMPTE 2082-11) * · 12G-SDI Single-Link 4K 60/59.94p YCbCr 4:2:2 10 bits (SMPTE 2082-10) · 6G-SDI Single-Link 4K 30/29.97p YCbCr 4:2:2 10 bits (SMPTE 2081-10) (* 12G-SDI Dual Link output is treated as reference)

Features

· 12G-SDI signal 8K 60/59.94p YCbCr 4:2:2 10 bits · 12G-SDI signal 4K 60/59.94p YCbCr 4:2:2 10 bits · Supports ITU-R BT.2020 · Audio 32ch can be embedded · Payload ID can be embedded · Time code can be embedded · HDR supported. · Reference input support (Internal synchronization / external synchronization selectable) · Supports external control (LAN / RS-232C) Pattern · Color bar (100% / 75%) · Raster (White / Gray) · Check field (Pathological) · Ramp · Crosshatch · Multiburst · Black

Specifications

Specifications VIDEO Number of output terminals 4ch HD-SDI SMPTE 274M, 3G-SDI SMPTE 425-5, 425-1 6G-SDI SMPTE 2081-10 12G-SDI SMPTE 2082-12, 2082-10 Gradation 10bit Colorimetry Rec.ITU-R BT.2020R/Rec.ITU-R BT-709 AUDIO Number of channels 32ch Sampling frequency 48kHz Resolution 24bits Audio level -18dBFs / -20dBFs Audio frequency 1kHz PAYLOAD standard SMPTE ST2082 / ST425-1(Byte2) reference Insertion code Normal insertion TIMECODE standard SMPTE 12M-2, 12M-3 Time code VITC TIMECODE LTC TIMECODE HFRTC TIMECODE REFERENCE Interface 75 O BNC input 1 line / 2 lines output reference Internal synchronization / external synchronization Sync output 525 NTSC BB signal, 625 PAL BB signal, 1125 HDTV Tri-level synchronization signal (1125/60i , 1125/59.94i )

VG-887 is a portable and easy to operate solution to HDMI 2.1 signal generation. It features the key function of HDMI 2.1 compatibility and is a more cost-effective solution compared to the top-end model VG-879.

Features

* Signal generation by FRL (Max. 12Gbps/4-lane) and TMDS modes. DSC 1.2 is supported * Uncompressed 8K/60p YCBCR 4:2:0 (12-bit), 4K/120p YCBCR 4:4:4 (12-bit) transmission * FRL Link Training, SCDC and EDID status check * HDCP 2.3 and 1.4 test * Pre-installed test patterns and user’s own image data can be output * PC control by LAN or RS-232C

Specifications

HDMI Specifications Interface HDMI×1ch Video Dot Clock Max. 1360MHz Data Rate Max. 48Gbps (FRL), 18Gbps (TMDS) Video Timing CTA-861-G Video Format RGB, YCBCR 4:4:4, 4:2:2, 4:2:0 Color Depth 8, 10, 12-bit HDCP Ver. 2.3 (FRL timing supports Ver. 2.3 only), Ver. 1.4 Audio L-PCM 8ch General Specifications Power Requirements AC100-240V Power Consumption 60W MAX Operating Temperature Range 0 to 40? Operating humidity range 20 to 80% RH (No Condensation) Dimensions 210 (W)×44(H)×300 (D) mm (Excluding Protrusions) Weight Approx. 2 kg

DPR-100 is a compact-sized and easy to use platform for Audio and HDCP compliance tests of DisplayPort Source devices. It provides all features needed for testing DisplayPort source devices like PC display cards or portable computers. It serves also as an AUX Controller for PHY CTS test automation. The DPR-100 allows you to monitor all aspects of the DP interface like Link and HDCP status and MSA. You can manually read and set DPR-100 DPCD, sink capabilities, issue varying HPD pulses etc. The Sink Console GUI also includes an advanced EDID parser for viewing and reprogramming its EDID information.

Features

* Compact sized DisplayPort Sink * Sink Console GUI enables full monitoring of the * DP interface * Certified for HDCP CTS * AUX controller for PHY CTS * USB controlled and powered

Specifications

Available Options DP HDCP 1.3 Compliance Testing: * DisplayPort RefSink HDCP 1.3 CTS * DisplayPort RefSink Extension HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort AUX RefSink Controller * DisplayPort AUX RefSink Controller Upgrade for HBR3 * DisplayPort RefSink Audio CTS

The DPT-200 is a fully-featured and easy to use DisplayPort source for development, debug and production line testing of DP controlled flat panel display modules, monitors and TV sets. DPT-200 is fully compatible with Unigraf DP RefSource CTS tools. DPT-200 is a hardware platform for HDCP compliance tests. It serves also as an AUX Controller for PHY CTS test automation. The DPT-200 allows you to monitor all aspects of the DP interface like Link and HDCP status, sink EDID and DPCD. You can also manually set DPCD, Link Parameters, Output Level Timing and Pattern used. The Source Console GUI also includes an advanced EDID editor and programmer for changing the sink EDID information. The DPT-200 allows you to easily perform tasks that are not possible with normal DP source devices. In addition to the Source Console GUI, you can use the Production Test Command set to interface DPT-200 to your automated production system.

Features

* Source Console GUI enables full monitoring and control of the DP interface * Manual and automatic link training * Manually settable output levels * Read and write EDID and DPCD * True Color patterns * Audio feed through * Controlled via USB or keypad

Specifications

Available Options: S/W to enable: DP HDCP 1.3 Compliance Testing: * DisplayPort RefSource HDCP 1.3 CTS SW * DisplayPort RefSource EXT HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort RefSource AUX Controller

UCD series is a family of compact-sized capture devices utilizing the USB interface. They provide a flexible and robust way of image capture in automated testing of display related ASICs and display electronics. The dedicated hardware and the easy to apply SW library provide an optimal platform for creating sensitive but short cycle time routines for test systems.

Features

* Compact, USB connected device * Captures 4 to 8 parallel V-by-One data lanes * 16 lanes with two and 32 lanes with four synchronized units * Up to 30 bit color depth * Easy to use SW SDK for Windows and Linux