Displays
154 Results
Raystar Optronics - 5 inch IPS, MIPI Capactitive Touch Panel TFT Display
XProduct SKU: RF3500D-AYW-MNG1
5 inch IPS, MIPI Capactitive Touch Panel TFT Display
Features
RF3500D-AYW-MNG1 is a 5-inch, IPS, Capactitive Touch Panel TFT Display and 16:9 aspect ratio. Its resolution is 720×1280 pixels. The module features wide viewing angle (80/80/80/80 degree) thanks to the IPS panel which is one of the most popular techniques on the market now. This Capactitive Touch Panel Display has driver IC ILI9881C supporting 4-lanes MIPI interface. It features low power consumption on the backlight, providing brightness 250 cd/m2 with contrast ratio (typical value) 800 : 1. The power supply voltage ranges from 2.6~3.6V, typical value is 3.3V. The module works within the temperature -20 to+70?, storage temperature covers from-30 to+80?.CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - 7" MIPI LCD Display, MIPI LCD Panel, MIPI Display Panel
XProduct SKU: RFH700A8-AYH-MNN
1024x600 IPS, TFT LCD Display 7 inch 1024x600 IPS with MIPI Interface
Features
RFH700A8-AYH-MNN is a 7" TFT LCD display module. Its resolution is 1024x600 pixels with aspect ratio 16:9. The module features wide viewing angle thanks to the IPS panel which is one of the most popular techniques on the market now. This TFT module adopts driver IC EK79007AD3 + EK73217BCGA supporting 4-Lanes MIPI interface. It also features wide viewing angle and high brightness, providing brightness 1100 cd/m2, contrast ratio (typical value) 800:1. Operating temperature covers from -20~+70?, storage temperature range is from -30~+80?. This design is a good fit for industrial application, medical equipment, home appliances, etc. Related products no.: RFH70BA8-AYH-MNG: With Projected Capacitive Touch Screen RFH700A8-AYH-MNS: With Resistive Touch ScreenCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - Bar Type TFT LCD Display, Stretched Bar LCD Display
XProduct SKU: BAR TYPE TFT DISPLAY
At present, many product applications on the market require the use of full-color TFT wide-screen displays (Bar Type TFT). Raystar currently introduces a variety of Bar-Type TFT LCD display modules. 3.9-inch and 5.2-inch TFT modules are currently available at this category, as well as options with control panel. We also provide modules with different interfaces including 8080 / DVI (HDMI CN) / MCU / MPU / RGB. If you need touch solution, we offer capacitive touch panel (PCAP) / resistive touch panel (RTP) / no touch panel TFT. Besides, if you’re looking for stretched bar LCD display with high brightness or high temperature ranges, we have some available standard products that can meet your need.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - High Brightness IPS TFT LCD 4 inch 480x480 with Capacitive Touchscreen
XProduct SKU: RFA6400E-AWH-DNG
High Brightness IPS TFT LCD 4 inch 480x480 with Capacitive Touchscreen
Features
FA6400E-AWH-DNG is a 480x480 pixels, 4-inch diagonal, 1:1 aspect ratio square TFT LCD display. This TFT LCD 4-inch has wider viewing angle due to its IPS panel, and features high brightness (800 cd/m2) which allows viewers to see clear and sharp image & video in daylight or very bright conditions. It adopts driver IC ST7701S supporting 24-bit RGB interface. The monitor also comes with a projected capacitive touch screen (PCAP). The PCAP touchscreen has a built-in IC ST1633I which enables 5-points touch, supports I2C interface; if you’d like to have module with no touch, the part number is RFA6400E-AWH-DNN. This TFT module also features wide temperature, operating and storage temperatures both range from -30~+80°C. Due to its advantages of high brightness, wider viewing angle and wide temperature ranges, this TFT LCD is a good fit for applications such as handheld testing devices, medical equipment, smart home appliances, etc. Related products no.: RFA6400E-AWH-DNN: Without Touch Screen RFA6400E-AWH-DNS: With Resistive Touch ScreenSpecifications
Size (Diagonal) 4 inch Dot Matrix / Resolution 480 × 3(RGB) × 480 dots Module Dimension 78.8(H) × 82.95 (W) × 7.17 mm View Area 72.46 × 70.78 mm Active Area 71.856(H) × 70.176 (V) mm Dot / Pixel Pitch 0.1497(H) × 0.1462(V) mm LCD Type TFT, Normally Black, Transmissive View Direction 80/80/80/80 (IPS) Aspect Ratio 1:1 Backlight Type LED, Normally White Control-Board No TFT Driver IC ST7701S or Equivalent Interface 24-bit RGB PCAP FW Version V01 PCAP IC ST1633I or Equivalent PCAP Interface I2C Detect Points 5 Points Touch Panel Projected Capacitive Touch Screen, PCAP Surface Anti-Glare Brightness 800 cd/? O-Film No Frame Through Hole No Operating Temperature -30~+80 °C Storage Temperature -30~+80 °C TFT Series IPS TFT LCD, Wide Temperature TFT LCD, Wide View TFT, High Brightness TFT LCDCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - MIPI LCD Display, MIPI LCD Panel, MIPI Display Panel
XProduct SKU: MIPI LCD DISPLAY
MIPI LCD Display, MIPI LCD Panel, MIPI Display Panel
Features
MIPI Mobile Industry Processor Interface is a relatively new standard, mainly used in mobile device applications. The application can be divided into DSI (display bus interface) serial display interface, CSI (camera serial interface), DPI (display pixel interface). DSI defines a high-speed serial interface between the main processor and the display module. The MIPI TFT LCD module introduced by Raystar has a high-speed advantage compared to the RGB interface. Our MIPI DSI standard TFT LCD display module contains different features, including high brightness, wide temperature, and wide viewing angle, etc. You are able to quickly select your suitable products by using the filters in the link below.CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - Small to Medium TFT LCD Panel Display Supporting HDMI Signal & Interface
XProduct SKU: HDMI TFT PANEL-P
This series is all about Raystar’s TFT LCD modules supporting HDMI signal. We provide a variety of sizes to choose from, such as 5", 5.2", 7", and 10.1" TFT LCD module with HDMI connector. You may also select modules with either Resistive Touch or Projected Capacitive Touch (PCAP) panel. Our PCAP touch panel can support 1-point/2-point/multiple-point touch. You’re able to search for suitable products by using below specs filters. Besides, the brief descriptions under each product are helpful for you to browse through basic specs rapidly.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - Small to Medium TFT LCD Panel Display Supporting HDMI Signal & Interface
XProduct SKU: RFF70VG-1IW-DHG-P
7 inch 800x480 Resolution, Support HDMI Signal TFT with Capacitive Touch
Features
RFF70VG-1IW-DHG is a 7-inch, resolution 800x480 pixels, color active matrix TFT LCD display, featuring HDMI signal with projected capacitive touchscreen (USB interface). The module supports HDMI connector (only DVI signal) interface. The PCAP touchscreen has a built-in IC ILI2130 which enables 1-point/2-point/multiple-point touch. The brightness is 350 cd/m2 with contrast ratio 500:1. LCM voltage ranges from 4.9V-5.1V, typical value is 5V. Operating temperature covers from -20~+70?, storage temperature range is from -30~+80?. ?RFF70VG-1IW-DHG: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (contain Pi 4B) version. If customers choose displays supporting Raspberry Pi 4, please note that the interface is only compatible with micro HDMI. Customers need to use “Micro HDMI to HDMI” cable for these TFT series. ?RFF700G-1IW-DHG: without connector on board(do not support Raspberry Pi).Specifications
ITEM DIMENSION UNIT Size (Diagonal) 7 inch Dot Matrix / Resolution 800 × RGB × 480(TFT) dots Module Dimension 165.0(W) × 100(H) × 26.6(D) mm View Area 155.22 × 87.19 mm Active Area 154.08 × 85.92 mm Dot / Pixel Pitch 0.0642 × 0.179 mm LCD Type TFT, Normally White, Transmissive View Direction 12 o’clock Gray Scale Inversion Direction 6 o’clock Aspect Ratio 16:9 Backlight Type LED, Normally White Control-Board Yes Interface HDMI(only for DVI) PCAP FW Version 0x07.0x00.0x00.0x00.0x65.0x90.0x00.0x01 PCAP IC ILI2130 or Equivalent PCAP Resolution 16384*16384 Detect Points 1 / 2 / Option Points Touch Panel Projected Capacitive Touchscreen, PCAP Surface Glare Brightness 350 cd/? Frame Through Hole No Operating Temperature -20~+70 °C Storage Temperature -30~+80 °C TFT Series Support HDMI Signal TFT LCD DisplayCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Raystar Optronics - Small to Medium TFT LCD Panel Display Supporting HDMI Signal & Interface
XProduct SKU: RFF50VB-1IW-DHG-P
LCD 5 inch 800x480 Support HDMI Signal TFT with Projected Capacitive Touchscreen
Features
RFF50VB-1IW-DHG is a 5-inch, resolution 800x480 pixels, TN transmissive color active matrix TFT LCD display, featuring HDMI signal with projected capacitive touchscreen (USB interface). This module has built-in controller TFP401, supporting HDMI connector (only DVI signal) interface. The PCAP touchscreen has a built-in IC ILI2130 which enables 1-point/2-point/multiple-point touch. ?RFF50VB-1IW-DHG: with a 40-pin header connector on board, supports up to Raspberry Pi 3B+ (contain Pi 4B) version. If customers choose displays supporting Raspberry Pi 4, please note that the interface is only compatible with micro HDMI. Customers need to use “Micro HDMI to HDMI” cable for these TFT series. ?RFF500B-1IW-DHG: without connector on board (do not support Raspberry).Specifications
Size (Diagonal) 5 inch Dot Matrix / Resolution 800 × 3(RGB) × 480 dots Module Dimension 120.7 × 75.8 × 23.2 (Max) mm View Area 109 × 65.6 mm Active Area 108.0 × 64.8 mm Dot / Pixel Pitch 0.045 × 0.135 mm LCD Type TFT, Normally White, Transmissive View Direction 12 o’clock Gray Scale Inversion Direction 6 o’clock Aspect Ratio 5:3 Backlight Type LED, Normally White Control-Board Yes Built-in Controller TFP401 Interface HDMI (only for DVI) PCAP FW Version 0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00 PCAP IC ILI2130 or Equivalent PCAP Interface USB PCAP Resolution 16384*16384 Detect Points 1 / 2 / Option Points Touch Panel Projected Capacitive Touchscreen, PCAP Surface Glare Brightness 400 cd/? Frame Through Hole No Operating Temperature -20~+70 °C Storage Temperature -30~+80 °C TFT Series Support HDMI Signal TFT LCD DisplayCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
RiTDisplay - Full Color OLED & Mono OLED Options
XProduct SKU: RGS10096064FR023
-Size 0.95" - Small molecular organic light emitting diode. - Color : Full - Panel resolution : 96x3x64 - Driver IC : SSD1357Z - Excellent quick response time. - Extremely thin thickness for best mechanism design : 1.227 mm - High contrast : 10,000:1 - Wide viewing angle : 160° - Interface: 8-bit 6800/8080-series parallel interface,4-wire serial peripheral interface,I2C Interface - Wide range of operating temperature : -40 to 70°C - Anti-glare polarizer
Features
Strengths of OLED Wide Viewing Angle Because an OLED becomes self-emissive through organic material, its viewing angle is far wider than an LCD. This wide viewing angle can provide great improvements in a wide variety of product applications. It also offers new design concepts to industrial designers who were before limited by the constraints of traditional LCD Fast Response Time A slow response time is one of the main problems with existing LCD technology. Applications, which require animation, are limited to a certain extent with traditional LCD. OLED offers 1,000 timers quicker than in response speed which reduces design constraint of displays. Low Power Consumption Because backlight is not required for OLED, the power consumption is lower than a LCD module. This can increase the lifetime of batteries for portable products. Compact size Since a backlight is not required for OLED, lightweight and extremely thin displays can be applied to many products, opening up a wide range of new design possibilities. High Brightness & Contrast OLED offers a drastically higher level of brightness and contrast as compared to LCD.CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPA-400 DP Aux Channel monitor
XProduct SKU: DPA400 2.0
DPA-400 and its AUX Channel Monitor user interface (GUI) provides a compact, pocket-sized tool for recording and analyzing DisplayPort AUX channel traffic. It enables the user to monitor, capture, and document all AUX Channel transactions over a DisplayPort link. AUX Channel Monitor GUI detects, timestamps, and parses all DisplayPort Configuration Data (DPCD) reads and writes, Multistream (MST) Sideband Channel Communication, and EDID reads. The GUI is able to parse DPCD registers for DP versions up to 2.0. It decodes HDCP 1.3 and 2.3 messages and DP Sideband Channel Communication messages. The activity of the Hot Plug Detect (HPD) signal and optional user-defined input signals will also be tracked and time-stamped. Unigraf’s AUX Channel Monitor is a mandatory tool for any engineer that wants to verify and/or debug Compliance Tests and Interoperability Test results. By analyzing the details of the source-sink interaction, the designer is able to fully confirm the behavior of both parties. When the content of each read and write are available in detail, there will be no room for guessing.
Features
* Compatible with all DP versions * Device-independent * Data interpreter with time stamps * Detect and parse all DPCD locations * Decode the Sideband CH Communication messages * Pocket size * USB controlled and powered Applications * Silicon validation * Software debug and validation * Resolve interoperability problems * Monitoring and time measurement of eventsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPR-120 DP1.2 test device
XProduct SKU: DPR-120
DPR-120 is a fully-featured DisplayPort™ 1.2 compliant Reference Sink. Verify DisplayPort interfaces up to 4K@60Hz. It provides all features needed for testing DP Multistream (MST) source devices like PC display cards or portable computers. The Debug and Test Controller GUI is the user interface of DPR-120. It provides the user with a multitude of valuable tools for monitoring the performance of the DUT. VESA has certified DPR-120 as the Authorized Test tool for testing Link layer CTS 1.2 Core and Extension Set 1 revision 1.1. Unigraf’s DPR-120 DisplayPort Reference Sink is an Authorized Test Tool for DP 1.2 Link Core and Link Ext1 CTS tests for testing DisplayPort source devices. DPR-120 Debug and Test Controller SW (DTC) is the graphical user interface (GUI) for controlling the DP 1.2 Link CTS tests with DPR-120 Reference Sink. DPR-120 DTC also has many powerful debug features for monitoring the status of the tested unit (DUT) and the test procedure.
Features
* Compact sized DisplayPortTM 1.2 compliant Reference Sink * HBR2 & MST capable Sink and Branch device * Certified as the platform for DP 1.2 LL CTS Ext1 tests * Optional MST Debug panel & AUX Channel Monitor * Debug and Test Controller GUI enables monitoring and previewing any MST stream * User programmable EDID and DPCDSpecifications
Available Options Test Automation: * DPR-120 MST Debug Extension * DPR-120 Test Automation Shell Software DP Link Layer Compliance Testing: * DisplayPort Link Layer CTS Ext1 and Core, Set A+B+C * DisplayPort RefSink Link Layer CTS Upgrade from A+B to A+B+C * DisplayPort RefSink Reduced Lane Count test, Set DCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPR100 DisplayPort Reference Sink
XProduct SKU: DPR100
DPR-100 is a compact-sized and easy to use platform for Audio and HDCP compliance tests of DisplayPort Source devices. It provides all features needed for testing DisplayPort source devices like PC display cards or portable computers. It serves also as an AUX Controller for PHY CTS test automation. The DPR-100 allows you to monitor all aspects of the DP interface like Link and HDCP status and MSA. You can manually read and set DPR-100 DPCD, sink capabilities, issue varying HPD pulses etc. The Sink Console GUI also includes an advanced EDID parser for viewing and reprogramming its EDID information.
Features
* Compact sized DisplayPort Sink * Sink Console GUI enables full monitoring of the * DP interface * Certified for HDCP CTS * AUX controller for PHY CTS * USB controlled and poweredSpecifications
Available Options DP HDCP 1.3 Compliance Testing: * DisplayPort RefSink HDCP 1.3 CTS * DisplayPort RefSink Extension HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort AUX RefSink Controller * DisplayPort AUX RefSink Controller Upgrade for HBR3 * DisplayPort RefSink Audio CTSCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPT-200 DisplayPort Ref Source
XProduct SKU: DPT200
The DPT-200 is a fully-featured and easy to use DisplayPort source for development, debug and production line testing of DP controlled flat panel display modules, monitors and TV sets. DPT-200 is fully compatible with Unigraf DP RefSource CTS tools. DPT-200 is a hardware platform for HDCP compliance tests. It serves also as an AUX Controller for PHY CTS test automation. The DPT-200 allows you to monitor all aspects of the DP interface like Link and HDCP status, sink EDID and DPCD. You can also manually set DPCD, Link Parameters, Output Level Timing and Pattern used. The Source Console GUI also includes an advanced EDID editor and programmer for changing the sink EDID information. The DPT-200 allows you to easily perform tasks that are not possible with normal DP source devices. In addition to the Source Console GUI, you can use the Production Test Command set to interface DPT-200 to your automated production system.
Features
* Source Console GUI enables full monitoring and control of the DP interface * Manual and automatic link training * Manually settable output levels * Read and write EDID and DPCD * True Color patterns * Audio feed through * Controlled via USB or keypadSpecifications
Available Options: S/W to enable: DP HDCP 1.3 Compliance Testing: * DisplayPort RefSource HDCP 1.3 CTS SW * DisplayPort RefSource EXT HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort RefSource AUX ControllerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-1 MLC LVDS frame grabber box
XProduct SKU: UCD-1 MLC
UCD-1 MLC is a frame grabber that can capture four (4) 6-lane mini-LVDS channels. It enables automated testing of TFT LCD module T-Con boards, T-Con chips and TV Main Boards with mini-LVDS output. Multiple signaling schemes can be configured to make testing of various mini-LVDS bus signaling types easy and straightforward.
Features
* Compact, USB connected device * Captures 4 parallel mini-LVDS channels with 6 data lanes * Easy to use Software System Development Kit (SDK) for Windows and Linux * Configuration data for compatibility with various mini-LVDS typesCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-1 QLV Quad-LVDS frame grabber box
XProduct SKU: UCD-1 QLV
UCD-1 QLV is a frame grabber that can capture four (4) parallel LVDS channels. It enables automated testing of LCD TV main boards with Quad LVDS output. The used link configuration, color depth and pixel mapping is defined with configuration data.
Features
* Compact, USB connected device * Captures 4 parallel LVDS channels * VESA and JEIDA color modes with 18 to 36 bits per pixel * Easy to use Software System Development Kit (SDK) for WindowsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-2 VbyOne frame grabber box
XProduct SKU: UCD-2 VX1
UCD series is a family of compact-sized capture devices utilizing the USB interface. They provide a flexible and robust way of image capture in automated testing of display related ASICs and display electronics. The dedicated hardware and the easy to apply SW library provide an optimal platform for creating sensitive but short cycle time routines for test systems.
Features
* Compact, USB connected device * Captures 4 to 8 parallel V-by-One data lanes * 16 lanes with two and 32 lanes with four synchronized units * Up to 30 bit color depth * Easy to use SW SDK for Windows and LinuxCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-240 4K video production test box
XProduct SKU: UCD240
UCD-240 is a cost-effective and flexible Test Automation tool for testing USB Type-C products in the production line environment. UCD-240 is a fully-featured Test Automation tool supporting DP Alt Mode, 4K@60Hz and NI TestStand. UCD-240 is easy-to-use and its test coverage includes all essential features of the USB-C interface.
Features
*Automated tests for USB-C™ DisplayPort™ Alt Mode *Electrical Test to verify whole USB-C connector with single cable insert *Test USB 2.0 and USB 3.0 *4K@60Hz support *Easily set test parameters with provided Software *Easily run tests from the command-line *Unigraf’s Test System Interface (TSI) Support *Third Part Test Management Software Support e.g. NI TestStand SupportSpecifications
Optional extras: HARDWARE: *UCD-240 USB-C DP Alt Mode Tester (Dual Port Option) R&D DEBUGGING: *USB-C External Power Test UnitCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-301 4K HDMI & DP Analyser
XProduct SKU: UCD301
UCD-301 is a UHD / 4K@60Hz compliant video capture unit for testing DisplayPort™ and HDMI Sources. UCD-301 enables testing all aspects of HDMI 2.0 and DP 1.4a with HBR2 max bit rate capability. UCD-301 is a DCP approved test tool for HDCP 2.3 compliance testing of DisplayPort transmitters.
Features
Electrical Tests With UCD-301 Digital, the tester can verify the electrical continuity of each signal in the HDMI and DisplayPort interface. The TSI test automation routine allows the calling application to set the target limits. TSI provides the result through ‘Pass / Fail’ indication with the actual measured value. includes UCD Console The UCD-301 graphical user interface for R&D debugging is called UCD Console. It provides the user with a flexible way of navigating between the interface based Roles of the device and the functionalities of each Role. UCD Console features preview windows for the received video and audio, monitoring and controls for the USB-C connection parameters, DP link parameters, and an EDID editor. UCD Console also provides the status and control of the HDCP functionSpecifications
Available Options: *UCD Console Pro for testing DP Source DUT *UCD Console Pro for testing HDMI Source DUT *HDCP 2.3 Support *DP HDCP 2.3 Compliance Testing *DP HDCP 2.3 CTS Test Set for Testing Transmitter DUT *TSI SDK Advanced Test Set *TSI SDK Advanced Test Set with HDCP 2.3 Support *TSI Electrical Test SetCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry