FPGA - Low Power
Showing the single result
Microchip - Igloo Family
XProduct SKU: AGLN-NANO-KIT
The Microsemi IGLOO® series of low-power flash FPGAs includes IGLOO/e, IGLOO nano and IGLOO PLUS - the industry's low-power FPGAs. IGLOO FPGA family are designed to meet the demand of low power and small foot print requirements of today's portable and power-conscious electronics. The IGLOO low-power FPGA family support up to 35K logic elements with up to 504 kbits of true dual-port SRAM, up to 6 embedded PLLs, and up to 620 user I/Os. Low-power applications that require 32-bit processing can use the ARM ® Cortex-M1 processor without license fee or royalties in M1 IGLOO devices. The IGLOO FPGA family devices are available in small footprint (3x3, 4x4, 5x5, 6x6 and 8x8 mm), high density, chip-scale and quad flat no-lead packages. The IGLOO series includes: - IGLOO/e with ARM Cortex-M1 - IGLOO nano - IGLOO PLUS
Features
Flash*Freeze Technology
The Flash*Freeze technology used in IGLOO devices enables easy entry and exit from low power mode which consumes as little as 2 µW, while retaining SRAM and register data. Flash*Freeze technology simplifies power management through I/O and clock management without a need to turn off voltages, I/Os, or clocks at the system level.In Flash*Freeze mode, power drops to as low as 2 µW, and no additional components are required to turn off I/Os or clocks while preserving the design information, SRAM content, and registers. I/Os can maintain their state during Flash*Freeze mode. Entering and exiting Flash*Freeze mode takes less than 1 µs.Small Footprint Packages
Microsemi IGLOO low-power FPGAs are true single-chip devices, do not require configuration or other support components, and offer a variety of small-footprint packages with high I/O pin count to match design needs. The Microsemi IGLOO family is offered in a small form factor (3x3, 4x4, 5x5, 6x6, and 8x8 mm), high-density, chip-scale packages and quad flat no-lead packagesSpecifications
Device Comparison
| IGLOO Family | IGLOO/e | IGLOO nano | IGLOO PLUS |
|---|---|---|---|
| ARM - Enabled | M1 IGLOO/e | ||
| Overview | The low-power programmable solution | The industry's lowest-power, smallest-size solution | The low-power FPGA with more I/O per LE compared to IGLOO |
| Equivalent LEs | 330-35K | 100-3K | 330-1K |
| Max User I/Os | 620 | 71 | 212 |
| Power Consumption | 5 µW | 2 µW | 5 µW |
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Enquire for availability
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip IGLOO®2 FPGA Family
XProduct SKU: M2GL-EVAL-KIT-P
Microsemi's IGLOO®2 FPGAs, targeted at the cost-optimized FPGA market, integrate fourth generation flash-based FPGA fabric and high performance communications interfaces on a single chip. The IGLOO2 FPGAs offer a cost optimized FPGA with best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry. Best-In-Class: Integration, Power, Reliability & Security Microsemi Leadership in Cost-Optimized FPGAs - Highest number of 5G transceivers - Highest number of GPIO - Highest number of PCI Compliant 3.3V I/O - Only FPGA with hardened memory subsystem - Only non-volatile and instant-on mainstream FPGA Microsemi Leadership in Low Power FPGAs - 3X lower static power with no performance penalties - Flash*Freeze real-time power management - 25% lower total power Microsemi Leadership in Reliable FPGAs - Only FPGA with SEU immune fabric configuration cells - Extended temperature support (Up to 125degC Tj) Microsemi Leadership in Secure FPGAs - Built-in state-of-the-art design security for all devices - Easy-to-use!
Features
Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost optimized FPGA markets by providing a LUT based fabric, 5G transceivers, high speed GPIO, block RAM and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to 5X more logic density and 3X more fabric performance than its predecessors and combines a non-volatile Flash based fabric with the highest number of general purpose I/O, 5G SERDES interfaces and PCI Express end points when compared to other products in its classCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip-Flashpro SoC Device Programmier
XProduct SKU: FLASHPRO5
The Microsemi FlashPro programming system is a combination of Microsemi FlashPro software and a hardware programmer. Together they provide in-system programming (ISP) for all FPGAs in the IGLOO2, SmartFusion2, RTG4, IGLOO® Series and ProASIC3 Series (including RT ProASIC3), and the SmartFusion, Fusion, ProASICPLUS, and ProASIC families. Flashpro5 is a hardware programmer supporting all SoC FPGA and FPGA devices except ProASICPlus on Windows and SmartFusion2/IGLOO2 devices on Linux Whether you are programming a board containing a single device or multiple devices connected in a chain, you can quickly program and reprogram Microsemi flash FPGAs by connecting to a PC and the target board. FlashPro programmers provide everything you need to program flash FPGAs for compliance with IEEE 1149, using the JTAG port. Click here for more information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Microchip-ProASIC3 FPGA
XProduct SKU: A3P125-TQG144-P
The ProASIC®3 series of FPGAs, which includes ProASIC3/e, ProASIC3 nano, and ProASIC3L, offers a breakthrough in performance, density, and features for today's most demanding high-volume applications. ProASIC3 devices support the ARM - Cortex-M1 soft processor IP core, offering the benefits of programmability and time-to-market. The ProASIC3 families are based on nonvolatile flash technology and support 100 to 35K LEs and up to 620 I/Os. Military grade devices support 3K to 35K logic elements and 32-bit Cortex M1 soft processor implemented in the FPGA.
Features
- Enhanced commercial temperature range - Selectable Schmitt trigger inputs - Hot-swappable and cold-sparing I/Os - Reprogrammable and nonvolatile - 1,024 bits of user flash memory - Single-chip and Instant-ONCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry