Wi-Fi
Showing the single result
From£25.70(Ex. VAT)
DIGI XBEE WI-FI (S6B)
XProduct SKU: XB2B-WFST-001-P
DIGI XBEE WI-FI
Embedded Wi-Fi modules provide ultra low-power 802.11b/g/n communications in the flexible Digi XBeehardware and software footprint Digi XBee Wi-Fi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the Digi XBee Wi-Fi creates new wireless opportunities for energy management, process and factory automation, wireless sensor networks, intelligent asset management and more. Featuring easy provisioning methods and native Digi Remote Manager ® connectivity, Digi XBee Wi-Fi modules give developers the fastest IP-to-device and device-to-cloud capability possible. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability. Digi XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The Digi XBee Wi-Fi shares a common footprint with other Digi XBee modules. This allows different Digi XBee technologies to be drop-in replacements for each other. As a member of the Digi XBee family, the Digi XBee WiFi combines hardware with software for a complete modular solution. Digi XBee Wi-Fi modules are designed to communicate with access points in existing 802.11 infrastructures. Developers can use AT and API commands for advanced configuration options.Features
- Native Digi Remote Manager integration for data acquisition and device management - Hardware and software complete module easily joins existing 802.11 b/g/n (Wi-Fi) infrastructures - Common Digi XBee footprint allows OEMs to support a variety of wireless protocols - Flexible SPI and UART serial interfaces - Available in Surface Mount and Through-Hole form factors - Support for low-power sleeping applications with <6 µA power-down current - Over-the-air data rates up to 72 Mbps - Simple provisioning methods including Soft AP and Wi-Fi Protected Setup (WPS)From£25.70(Ex. VAT)
Enquire for availability
Make an Enquiry
From£175.00(Ex. VAT)
e-peas semiconductors - Energy Harvesting LoRa BLE Bluetooth Kit
XProduct SKU: EHLORA-KIT3
The EHLORA-Kit 3 combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit with Silicon Labs BLE kits. This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module or the BLE Products, The E-Peas kit then allows you to power the LoRa module by using Energy Harvesting techniques, enabling you to develope your product to operate in remote locations where changing power sources maybe difficult, time consuming and expensive.
From£175.00(Ex. VAT)
Enquire for availability
Make an Enquiry
From£337.00(Ex. VAT)
e-peas semiconductors - Energy Harvesting LoRa Kit 1
XProduct SKU: EHLORA-KIT1
The EHLORA-Kit combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit. This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module. This kit provides easy access to the features of the WLR089U0 LoRa module and explains how to integrate the device in a custom design. The E-Peas kit then allows you to power the LoRa module by using Energy Harvesting techniques, enabling you to develope your product to operate in remote locations where changing power sources maybe difficult, time consuming and expensive.
From£337.00(Ex. VAT)
Enquire for availability
Make an Enquiry
From£425.00(Ex. VAT)
e-peas semiconductors - Energy Harvesting LoRa Kit 2
XProduct SKU: EHLORA-KIT2
The EHLORA-Kit2 combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit. A Robustell R3000 Gateway is also provided. along with various Antennas. This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module, combining it with the E-Peas kit allowing you to power the LoRa module by using Energy Harvesting techniques, this then links to the Gateway giving you a complete application for devlopement of your product.
From£425.00(Ex. VAT)
Enquire for availability
Make an Enquiry
From£35.00(Ex. VAT)
Microchip - AVR-IOT Eval Board AC164160
XProduct SKU: AC164160
The AVR-IoT WG development board is a small and easily expandable demonstration and development platform for IoT solutions, based on the AVR® microcontroller architecture using Wi-Fi® technology. It was designed to demonstrate that the design of a typical IoT application can be simplified by partitioning the problem into three blocks: • Smart - represented by the ATmega4808 microcontroller • Secure - represented by the ATECC608A secure element • Connected - represented by the WINC1510 Wi-Fi controller module .
Features
The AVR-IoT WG development board features a USB interface chip Nano Embedded Debugger (nEDBG) that provides access to a serial port interface (serial to USB bridge), a mass storage interface for easy ‘drag and drop’ programming, configuration and full access to the AVR microcontroller UPDI interface for programming and debugging directly from Microchip MPLAB® X IDE and the Atmel® Studio 7.0 IDE. The AVR-IoT WG development board comes preprogrammed and configured for demonstrating connectivity to the Google Cloud IoT Core. The AVR-IoT WG development board features two sensors: • A light sensor • A high-accuracy temperature sensor - MCP9808 Additionally, a mikroBUS™ connector is provided to expand the board capabilities with 450+ sensors and actuators offered by MikroElektronika (www.mikroe.com) via a growing portfolio of Click boards™From£35.00(Ex. VAT)
8 In stock
Make an Enquiry
From£92.25(Ex. VAT)
10 In stock
Make an EnquiryFrom£16.50(Ex. VAT)
5 In stock
Make an EnquiryEnquire for availability
Make an Enquiry
From£22.00(Ex. VAT)
SparkLan - AD6212SD Combo WIFI + Bluetooth Module
XProduct SKU: AP6212SD-P
AP6212SD is 11b/g/n 1T1R WiFi +Bluetooth 4.1 WiFi module. It's a highly integrated single-chip solution and provides the highest level of integration for a mobile or handheld wireless systems. The WiFi module is designed to address the needs of highly portable devices that require minimal power consumption and compact size. It implements the world's most advanced Enhanced Collaborative Coexistence algorithms and hardware mechanisms, allowing for an extremely collaborative WLAN and Bluetooth coexistence. AP6212SD can support AP+Station mode at the same time. It can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. The integrated module provides SDIO interface for WiFi, UART / I2S / PCM interface for Bluetooth.
From£22.00(Ex. VAT)
Enquire for availability
Make an Enquiry