Wireless
296 Results
From£31.50(Ex. VAT)
25 In stock
Make an EnquiryFrom£31.50(Ex. VAT)
30 In stock
Make an EnquiryFrom£6.50(Ex. VAT)
625 In stock
Make an EnquiryFrom£245.00(Ex. VAT)
1 In stock
Make an EnquiryFrom£95.80(Ex. VAT)
2 In stock
Make an Enquiry5 In stock
Make an Enquiry
From£250.00(Ex. VAT)
Mesh Network IoT Dev Kit
XProduct SKU: DS-IOT-01
Mesh Network Development Kit / Set for IoT This development set enables you to build your complete IoT solution from sensors and actuators through a gateway - up to different clouds and mobile apps in a matter of hours. You will be able to extend your network with ready IQRF interoperable devices and use your solution for proof-of-concept projects. This set provides a wireless network based on IQRF mesh technology. It includes: > Sensors for temperature, light intensity, voltage measurement > Relay kit > IQRF programmer & debugger > Transceivers > IQRF coordinator adapter for the UP board > Connectors and cables > Software UP Board and power adapter; UP board: 2GB RAM, 32GB eMMC- when fitted with the IQRF coordinator from the Development Set, provides a gateway to cloud services. Preinstalled software: No. Products Included in this Kit/Set: DCTR-72DAT (IQRF transceiver) CK-USB-04A (IQRF programmer, debugger and TR host with USB connectivity) DK-EVAL-04A (Universal portable development kit for TR transceivers, TR host) DDC-SE-01 (IQRF evaluation and development kit with sensors) DDC-RE-01 (IQRF evaluation and development kit with relays) KON-RASP-01 (Adapter to connect IQRF transceiver to Raspberry Pi or alternatives) CAB-USBABMICRO (Micro USB cable 18.5 cm) USB flash drive (Software and documentation - including Custom DPA handlers and IQRF IDE with specialized macros)
From£250.00(Ex. VAT)
2 In stock
Make an Enquiry
From£35.00(Ex. VAT)
Microchip - AVR-IOT Eval Board AC164160
XProduct SKU: AC164160
The AVR-IoT WG development board is a small and easily expandable demonstration and development platform for IoT solutions, based on the AVR® microcontroller architecture using Wi-Fi® technology. It was designed to demonstrate that the design of a typical IoT application can be simplified by partitioning the problem into three blocks: • Smart - represented by the ATmega4808 microcontroller • Secure - represented by the ATECC608A secure element • Connected - represented by the WINC1510 Wi-Fi controller module .
Features
The AVR-IoT WG development board features a USB interface chip Nano Embedded Debugger (nEDBG) that provides access to a serial port interface (serial to USB bridge), a mass storage interface for easy ‘drag and drop’ programming, configuration and full access to the AVR microcontroller UPDI interface for programming and debugging directly from Microchip MPLAB® X IDE and the Atmel® Studio 7.0 IDE. The AVR-IoT WG development board comes preprogrammed and configured for demonstrating connectivity to the Google Cloud IoT Core. The AVR-IoT WG development board features two sensors: • A light sensor • A high-accuracy temperature sensor - MCP9808 Additionally, a mikroBUS™ connector is provided to expand the board capabilities with 450+ sensors and actuators offered by MikroElektronika (www.mikroe.com) via a growing portfolio of Click boards™From£35.00(Ex. VAT)
8 In stock
Make an EnquiryFrom£6.95(Ex. VAT)
Enquire for availability
Make an Enquiry
From£10.55(Ex. VAT)
Microchip - LoRa Module WLR089U0
XProduct SKU: WLR089U0-I/RM
The WLR089U0 module is an ultra-low power, regulatory certified LoRa module based on the ATSAMR34J18 LoRa IC. This standalone module includes a 32-bit ARM® Cortex®-M0+ processor and offers 256KB of Flash and 40KB of SRAM (8KB battery backed) in a compact 17 x 13.5 mm package. With ultra-low power sleep currents as low as 790nA, the WLR089U0 modules are ideal for battery powered remote sensor applications. The highly configurable module peripherals include up to 4 SERCOMs (configurable as I2C/SPI /UART/LIN interfaces) with one in the low power domain, 7 12-bit ADC channels and 2 analog comparators. The module supports LoRa, FSK, MSK and OOK modulations and delivers up to 18.6 dBm TX power with an RX sensitivity down to -136 dBm. The module operates from 863 to 928 MHz and is FCC, IC and RED certified. Supported by WLR089 Xplained Pro Evaluation Kit (EV23M25A), Atmel Studio and a detailed module reference design package, these modules highly simplify the development and accelerate the time to market for LoRa end-nodes.
Features
- Ultra-low power LoRa Module - Based on highly integrated, ultra-low power SAM R34/35 LoRa family - Standalone module with 256 KB flash and 40KB RAM - 863 to 928 MHz dual-band coverage - Compact surface mount module : 17 mm x 13.5 mm size - FCC, IC and RED certifiedSpecifications
The highly configurable module peripherals include up to 4 SERCOMs (configurable as I2C/SPI /UART/LIN interfaces) with one in the low power domain, 7 12-bit ADC channels and 2 analog comparators. The module supports LoRa, FSK, MSK and OOK modulations and delivers up to 18.6 dBm TX power with an RX sensitivity down to -136 dBm. The module operates from 863 to 928 MHz and is FCC, IC and RED certified. Supported by WLR089 Xplained Pro Evaluation Kit (EV23M25A), Atmel Studio and a detailed module reference design package, these modules highly simplify the development and accelerate the time to market for LoRa end-nodes.From£10.55(Ex. VAT)
31 In stock
Make an Enquiry
From£84.35(Ex. VAT)
Microchip - LoRa RN2483 Evaluation Kit
XProduct SKU: DM164138
The RN2483 is a fully-certified 868 MHz module based on wireless LoRa® technology. The RN2483 utilizes a unique spread spectrum modulation within the Sub-GHz band to enable long range, low power, and high network capacity. The module's embedded LoRaWAN protocol enables seamless connectivity to any LoRaWAN compliant network infrastructure, whether public or privately deployed. The module is specifically designed for ease of use, which shortens development time and speeds time to market. LoRa technology is ideal for battery-operated sensors and low power applications such as IoT, M2M, Smart City, Sensor networks, Industrial automation, and more. The RN2483 is the first LoRa module to pass LoRa Alliance Certification testing. It is certified to the LoRaWAN 1.0.1 specification, ensuring that designers can quickly and easily integrate their end devices into any LoRaWAN network. Firmware Versions RN2483A-I/RM104 - LoRaWAN Specification 1.0.1, Ideal for Class A applications, Regulatory and LoRaWAN certified RN2483A-I/RM105 - LoRaWAN specification 1.0.2, Supports both Class A and Class C, Regulatory certified Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*. *The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Features
Additional Features
- On-board LoRaWAN protocol stack - ASCII command interface over UART - Compact form factor 17.8 x 26.7 x 3 mm - Castellated SMT pads for easy and reliable PCB mounting - Device Firmware Upgrade (DFU) over UART - 14 GPIO for control, status, and ADC - Highly integrated module with MCU, crystal, EUI-64 Node Identity Serial EEPROM, Radio transceiver with analog front end, and matching circuitry - Environmentally friendly, RoHS compliant - European R&TTE Directive Assessed Radio ModuleFrom£84.35(Ex. VAT)
4 In stock
Make an EnquiryEnquire for availability
Make an EnquiryFrom£175.00(Ex. VAT)
Enquire for availability
Make an EnquiryFrom£92.25(Ex. VAT)
10 In stock
Make an EnquiryFrom£16.50(Ex. VAT)
5 In stock
Make an Enquiry
From£115.25(Ex. VAT)
Microchip - WLR089 LoRa Module & Evaluation Board
XProduct SKU: EV23M25A
The WLR089 Xplained Pro is a hardware platform designed to evaluate the WLR089U0 LoRa modules. The WLR089U0 modules are FCC, IC and RED certified. The WLR089 kit is not only an evaluation platform but also an excellent reference design for developing SAMR34/35 based LoRa end-node applications. This kit is supported by the Atmel Studio, an integrated development platform, which provides predefined application examples. The kit also provides easy access to various features of the WLR089U0 module and ATSAMR34J18B device and offers additional peripherals to extend the features of the board and ease the development of custom designs.
Features
Features ultra-low power WLr089U0 LoRa module with support for 862 - 1020 MHz. Dual-mode Frequency Operation On-board debugger (EDBG) eliminates the need for external debugger Two extension headers for signal breakout and expansion boards On-board power management system with current monitoring XPRO current measurement system data visualizer support On-board TCXO for optimal performance at long range External Whip Antenna with u.FL included Manual Reset Button and GPIO Button Indicator LEDs for Status and Power Auxiliary 10-Pin Cortex Programming Header Supported by Studio 7 Integrated Development Platform and software examples in Advanced Software Framework (ASF)From£115.25(Ex. VAT)
2 In stock
Make an EnquiryFrom£140.00(Ex. VAT)
1 In stock
Make an Enquiry
Pulse Electronics ISM Chip Antennas
XProduct SKU: W3013
Features:
• Frequency 866-870 MHz • Gain 1.5dBi • Size 10 x 3.2 x 4 mm • PCB Keep out 10.8 x 8.25mm • Polarization Linear • Radiation pattern Omni • ISM 868MHz BanCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry