Highly-efficient, regulated dual-outputs, ambient energy manager for TEG with optional primary battery Product Features:
Ultra-low-power start-up:
- Cold start from 60 mV input voltage and 150µW input power with the optional external module (typical)
- Cold start from 380 mV and 100 µW input power without the optional external module (typical)
Ultra-low-power boost regulator:
- Open-circuit voltage sensing for MPPT every 21s
- Configurable MPPT with 2-pin programming
- Selectable Voc ratios of 50, 55 or 75 %
- Input voltage operation range from 50 mV to 5V
- MPPT voltage operation range from 50 mV to 5V
- Constant impedance matching (ZMPPT)
Integrated 1.2/1.8 V LDO regulator:
- Up to 20 mA load current
- Power gated dynamically by external control
- Selectable output voltage
Integrated 1.8/2.5/3.3 V LDO regulator:
- Up to 80 mA load current with 300 mV drop-out
- Power gated dynamically by external control
- Selectable output voltage
Flexible energy storage management:
- Selectable overcharge and overdischarge protection for any type of rechargeable battery or (super)capacitor
- Fast supercapacitor charging
- Warns the load when battery is running low
- Warns when output voltage regulators are available
Optional primary battery:
- Automatically switches to the primary battery when the secondary battery is exhausted
Integrated balun for dual-cell supercapacitor
Applications:
> TEG harvesting
> Smart agriculture
> Industrial monitoring
> Wireless sensor nodes
> Home automation
Product Matrix:
Vin: 50mV to 5V
Cold-Start: 60mV 150µW
Pin: 3µW to 400mW
Pout: 20mA@1.2-1.8V 80mA@1.8-2.5-3.3V
MPPT: Yes
Package: QFN28 5x5mm
Highly-Efficient Regulated Dual-Output,
Ambient Energy Manager for AC or TEG sources
with optional primary battery
AEM30940 is an integrated energy management subsystem that extracts DC power from TEG to simultaneously store energy in a rechargeable element and supply the system with two independent regulated voltages. This allows product designers and engineers to extend battery lifetime and ultimately get rid of the primary energy storage element in a large range of wireless applications like industrial monitoring, home automation, wearables.
FEATURES:
Ultra-low power start-up;
- Cold start from 380 mV input voltage and 3 µW input power (typical)
Ultra-low power boost regulator;
- Open circuit voltage sensing for MPPT every 0.3s
- Configurable MPPT with 2-pin programming
- Selectable Voc ratios of 50, 65, 80, 100%
- Input voltage operation range from 50 mV to 5V
- MPPT voltage operation range from 50 mV to 5V
Integrated 1.2/1.8V LDO regulator;
- Up to 10 mA load current
- Power gated dynamically by external control
Integrated 1.8V-4.2V LDO regulator;
- Up to 80 mA load current with 300 mV drop-out
- Power gated dynamically by external control
Flexible energy storage management;
- Programmable overcharge and overdischarge protection
- For any type of rechargeable battery or (super)capacitor
- Fast supercapacitor charging
- Warns load when battery is running low
- Warns when regulators are switched on
Smallest footprint, smallest BOM;
- Only seven passive external components
Optional primary battery;
- Automatically switches to the primary battery when secondary battery is exhausted
APPLICATIONS:
> Harvesting from a TEG
> Harvesting from piezo generator
> Harvesting from micro turbine generator
> Industrial monitoring
> Home automation
> Wearables
> Smart agriculture
The EHBLE-Kit (Energy Harvesting Bluetooth Low Energy) kit is created to enable you to build a simple kit to show how a BLE device can be powered using Energy Harvesting.
The kit provides an E-Peas AEM10941 PV harvestor with the Silicon Labs BGM220 or BGX220 kits.
The EHLORA-Kit 3 combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit with Silicon Labs BLE kits.
This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module or the BLE Products,
The E-Peas kit then allows you to power the LoRa module by using Energy Harvesting techniques, enabling you to develope your product to operate in remote locations where changing power sources maybe difficult, time consuming and expensive.
The EHLORA-Kit combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit.
This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module. This kit provides easy access to the features of the WLR089U0 LoRa module and explains how to integrate the device in a custom design.
The E-Peas kit then allows you to power the LoRa module by using Energy Harvesting techniques, enabling you to develope your product to operate in remote locations where changing power sources maybe difficult, time consuming and expensive.
The EHLORA-Kit2 combines an E-Peas AEM10941 Energy Harvesting demo kit and the Microchip WLR089 Lora evaluation kit. A Robustell R3000 Gateway is also provided. along with various Antennas.
This hardware platform allows you to evaluate the low power LoRa®Sub-GHz WLR089U0 module, combining it with the E-Peas kit allowing you to power the LoRa module by using Energy Harvesting techniques, this then links to the Gateway giving you a complete application for devlopement of your product.
Highly-efficient, regulated dual-output, ambient energy manager for up to 7-cell solar panels with optional primary battery Product Features:
Ultra-low-power start-up:
- Cold start from 380 mV input voltage and 3 µW input power (typical)
Ultra-low-power boost regulator:
- Open-circuit voltage sensing for MPPT every 5s
- Configurable MPPT with 2-pin programming
- Selectable Voc ratios of 70, 75, 85 or 90 %
- Input voltage operation range from 50 mV to 5V
- MPPT voltage operation range from 50 mV to 5V
Integrated 1.2/1.8 V LDO regulator:
- Up to 20 mA load current
- Power gated dynamically by external control
- Selectable output voltage
Integrated 1.8 V-4.1 V LDO regulator:
- Up to 80 mA load current with 300 mV drop-out
- Power gated dynamically by external control
- Selectable or adjustable output voltage
Flexible energy storage management:
- Selectable overcharge and overdischarge protection for any type of rechargeable battery or (super)capacitor
- Fast supercapacitor charging
- Warns the load when battery is running low
- Warns when output voltage regulators are available
Smallest footprint, smallest BOM:
- Only seven passive external components
Optional primary battery:
- Automatically switches to the primary battery when the secondary battery is exhausted
Integrated balun for dual-cell supercapacitor
Applications:
> PV cell harvesting
> Home automation
> Industrial monitoring
> E-health monitoring
> Geolocation
> Wireless sensor nodes
Product Matrix:
Vin: 50mV to 5V
Cold-Start: 380mV 3µW
Pin: 3µW to 550mW
Pout: 20mA@1.8V 80mA@/1.2/1.8-4.1V
MPPT: Yes
Package: QFN28 5x5mm