Product Overview
BGM220-EK4314A
The BGM220 Explorer Kit is an ultra-low cost, small form factor development and evaluation platform for the BGM220P WirelessGecko Bluetooth® Module
The BGM220 Explorer Kit is focused on rapid prototyping and concept creation of IoTapplications. It is designed around the BGM220P Module, based on the EFR32BG22 System-on-Chip, which is an ideal device family for developing energy-friendly connected IoT applications.The kit features a USB interface, an on-board SEGGER J-Link debugger, one user-LEDand button, and support for hardware add-on boards via a mikroBus socket and a Qwiicconnector.
The hardware add-on support allows developers to create and prototype applications using a virtually endless combination of off-the-shelf boards from mikroE,sparkfun, AdaFruit, and Seeed Studios.
Features
Small Form Factor Kit
– EXP compatible breakouts
Target device
– BGM220PC22HNA
– Secure Bluetooth 5.2 module
– 76.8 MHz, ARM Cortex-M33 with 512 kB of flash and 32 kB RAM
– Bluetooth 5.2 Radio with supported for direction finding and LE coded PHY
– 38.4 MHz HFXO crystal
– 32.768 kHz LFXO crystal
– 2.4 GHz matching network and a chip antenna
On-board Board controller
– J-Link debugger
– SWD physical layer
– Packet trace over UART/async protocol
– Virtual COM with hardware flow control
USB Micro-B connector for debug connection
User interface features
– 1x button (with EM2 wake-up)
– 1x LED
Mini Simplicity Debug Connector (SLSDA001A compatible) with access to
– AEM
– PTI
– VCOM
– SWD
Third-party add-on connectors
– mikroBus socket
– Qwiic connector
