All Products
991 Results
Microchip - SmartFusion 2 Family
XProduct SKU: M2S090TS-EVAL-KIT-P
Microsemi's SmartFusion2 Security Evaluation Kit makes it easy to develop secure embedded systems and provides the best-in-world solutions for both Design Security—when protecting your design IP is critical; and Data Security—when protecting application data is necessary. The kit provides a cost effective SoC field programmable gate array (FPGA) platform for developing cost-optimized SoC FPGA designs using Microsemi's SmartFusion2 SoC FPGAs, which integrate inherently reliable flash-based FPGA fabric, a 166 MHz ARM® Cortex®-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM, and industry-required high-performance communication interfaces—all on a single chip. In addition, the SmartFusion2 Security Evaluation comes with a large 90K LE device to make it easy to develop transceiver I/O-based FPGA designs to build PCI Express® and Gigabit Ethernet-based systems and also have room for large IP blocks to complement the design. The board is also small form-factor PCIe compliant, which will allow quick prototyping and evaluation using any desktop PC or laptop with a PCIe slot. The kit enables you to: • Evaluate the Data Security features of SmartFusion2 SoC FPGAs including: – Elliptic Curve Cryptography (ECC) – SRAM-PUF (Physically Unclonable Function) – Random Number Generator (RNG) – AES/SHA – Anti-Tamper • Develop and test PCI Express Gen2 x1 lane designs • Test the signal quality of the FPGA transceiver using full-duplex SERDES SMA Pairs • Measure the low power consumption of the SmartFusion2 SoC FPGA • Quickly create a working PCIe link with the included PCIe Control Plane Demo The board includes an RJ45 interface to 10/100/1000 Ethernet, 512 MB of LPDDR, 64 MB SPI Flash, and USB-UART connections, as well as I2C, SPI, and GPIO headers. The kit includes a 12 V power adapter, but can also be powered through the PCIe edge connector. Also included is a free Platinum License for the Libero SoC software toolset to enable FPGA development and to utilize the reference designs made available with the kit.
Features
Kit Contents: 1x SmartFusion®2 system-on-chip (SoC) FPGA 90K LE M2S090TS-FGG484 Evaluation Board 1x USB A male to micro-B male cable 1x 12 V, 2 A AC power adapter 1x Quickstart guide 1x Libero® System-on-Chip (SoC) Platinum software one year license 1x FlashPro4 programmerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMicrochip - SmartFusion Family
XProduct SKU: A2F-EVAL-KIT-2
SmartFusion® System on Chip (SoC) FPGAs are the only devices that integrate an FPGA fabric, ARM Cortex-M3 Processor, and programmable analog circuitry, offering the benefits of full customization and IP protection, while still being easy to use. Based on a proprietary flash process, SmartFusion SoC FPGAs are ideal for hardware and embedded designers who need a true system-on-chip (SoC) solution that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs. SmartFusion SoC FPGAs provide you with: Full Design Customisability. - Create a product with exactly the features you need - Innovate and differentiate for a competitive edge - Incorporate last-minute changes with an on-chip FPGA fabric - Future-proof your design with in-application programming (IAP) capability for field upgrades - Experiment with hardware acceleration for select algorithms in FPGA fabric Intellectual Property (IP) Protection - Inherent flash FPGA IP security with a complete SoC - Snoop-free interface between microcontroller and FPGA - High design security since no bitstream download is required at power-up - Secure in-system programming (ISP) with 128-bit Advanced Encryption Standard (AES) via JTAG - FlashLock ® to prevent FPGA contents from being read back - Protection against overbuilding with customer programmable device key Ease-of-Use Increases Productivity - A single platform for your entire line of products - Libero SoC integrated design environment for both FPGA and embedded designers - Simple GUI-based configuration of complex programmable analog - Industry leading compile and debug from Keil™, IAR Systems® and GNU - Micrium supports SmartFusion devices with real time operating system (RTOS) and middleware components
Features
Microcontroller Subsystem (MSS) - Hardware industry-standard 100 MHz, 32-bit ARM Cortex-M3 CPU - Multi-layer AHB communication matrix with up to 16 Gbps throughput - 10/100 Ethernet MAC with RMII interface - Two of each: SPI, I2C, UART, 32-bit timers - Up to 512 KB flash and 64 KB of SRAM - External memory controller (EMC) - 8-channel DMA controller - Up to 41 MSS I/Os with Schmitt trigger inputs - 25 I/Os can be used as FPGA I/Os FPGA Fabric - Based on Microsemi's proven ProASIC3 architecture - 60,000 to 500,000 system gates with 350 MHz system performance - Embedded SRAMs and FIFOs - Variable aspect ratio 4,608-bit SRAM blocks - x1, x2, x4, x9 and x18 organizations - True dual-port SRAM (including x18) - Up to 128 FPGA I/Os supporting LVDS, PCI, PCI-X and LVTTL/LVCMOS standards Programmable Analog - High-performance analog signal conditioning blocks (SCB) with voltage, current and temperature monitors - Analog compute engine (ACE) offloads CPU from analog initialization and processing of analog-to-digital conversion (ADC), digital-to-analog conversion (DAC) and SCBs - Integrated ADCs and DACs with 1 percent accuracy - 12-/10-/8-bit mode ADCs with 500/550/600 Ksps sampling rate - Up to ten 15 ns high-speed comparators - Up to 32 analog inputs and 3 outputsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryFrom£115.25(Ex. VAT)
Microchip - WLR089 LoRa Module & Evaluation Board
XProduct SKU: EV23M25A
The WLR089 Xplained Pro is a hardware platform designed to evaluate the WLR089U0 LoRa modules. The WLR089U0 modules are FCC, IC and RED certified. The WLR089 kit is not only an evaluation platform but also an excellent reference design for developing SAMR34/35 based LoRa end-node applications. This kit is supported by the Atmel Studio, an integrated development platform, which provides predefined application examples. The kit also provides easy access to various features of the WLR089U0 module and ATSAMR34J18B device and offers additional peripherals to extend the features of the board and ease the development of custom designs.
Features
Features ultra-low power WLr089U0 LoRa module with support for 862 - 1020 MHz. Dual-mode Frequency Operation On-board debugger (EDBG) eliminates the need for external debugger Two extension headers for signal breakout and expansion boards On-board power management system with current monitoring XPRO current measurement system data visualizer support On-board TCXO for optimal performance at long range External Whip Antenna with u.FL included Manual Reset Button and GPIO Button Indicator LEDs for Status and Power Auxiliary 10-Pin Cortex Programming Header Supported by Studio 7 Integrated Development Platform and software examples in Advanced Software Framework (ASF)From£115.25(Ex. VAT)
2 In stock
Make an EnquiryFrom£195.00(Ex. VAT)
Microchip ATSAMA5D27-SOM1-EK1
XProduct SKU: ATSAMA5D27-SOM1-EK1
The ATSAMA5D27-SOM1-EK1 is a fast prototyping and evaluation platform for the SAMA5D2 based System in Packages (SiPs) and the SAMA5D27-SOM1 (SAMA5D27 System On Module). The kit comprises a baseboard with a soldered ATSAMA5D27-SOM1 module. The module features an ATSAMA5D27C-D1G-CU SIP embedding a 1-Gbit (128 MB) DDR2 DRAM. The SOM integrates a Power Management IC (PMIC), a QSPI memory, a 10/100 Mbps Ethernet PHY and a serial EEPROM with a MAC address. 128 GPIO pins are provided by the SOM for general use in the system. The board features a wide range of peripherals, as well as a user interface and expansion options, including two mikroBUS™ click interface headers to support MikroElektronika click boards™ and one PMOD™ interface. Linux distribution and software package allows you to easily get started with your development.
From£195.00(Ex. VAT)
4 In stock
Make an EnquiryFrom£2.37(Ex. VAT)
Microchip DAC
XProduct SKU: MCP4822-E/MS
Enquire for availability
Make an EnquiryFrom£0.78(Ex. VAT)
Microchip DAC MCP4726
XProduct SKU: MCP4726A0T-E/MAY
Enquire for availability
Make an EnquiryMicrochip Igloo Nano AGLN060V5
XProduct SKU: AGLN060V5-CSG81
The Industry's Low-Power FPGAs The IGLOO® series of ultra-low density FPGAs includes IGLOO/e, IGLOO nano and IGLOO PLUS IGLOO FPGA—the industry's low-power FPGAs. IGLOO FPGA family are designed to meet the demand of low power and small foot print requirements of today's portable and power-conscious electronics. The IGLOO low-power FPGA family support up to 35K logic elements with up to 504 kbits of true dual-port SRAM, up to 6 embedded PLLs, and up to 620 user I/Os. Low-power applications that require 32-bit processing can use the ARM ® Cortex-M1 processor without license fee or royalties in M1 IGLOO devices. The IGLOO FPGA family devices are available in small footprint (3x3, 4x4, 5x5, 6x6 and 8x8 mm), high density, chip-scale and quad flat no-lead packages.
Features
Microsemi's IGLOO® nano low-power FPGAs offer groundbreaking possibilities in power, size and operating temperature. Available in logic densities from 100 LEs to 3K LEs, the 1.2 V to 1.5 V IGLOO nano devices have been designed for high-volume applications where power and size are key decision criteria. - Ultra-low power in Flash*Freeze mode, as low as 2 µW - Variety of small footprint packages as small as 3x3 mm - Best system performance of 250 MHZ - Enhanced commercial temperature - Reprogrammable flash technology - 1.2 V to 1.5 V single voltage operation - Enhanced I/O features - Clock conditioning circuits (CCCs) and PLLsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMicrochip IGLOO®2 FPGA Family
XProduct SKU: M2GL-EVAL-KIT-P
Microsemi's IGLOO®2 FPGAs, targeted at the cost-optimized FPGA market, integrate fourth generation flash-based FPGA fabric and high performance communications interfaces on a single chip. The IGLOO2 FPGAs offer a cost optimized FPGA with best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry. Best-In-Class: Integration, Power, Reliability & Security Microsemi Leadership in Cost-Optimized FPGAs - Highest number of 5G transceivers - Highest number of GPIO - Highest number of PCI Compliant 3.3V I/O - Only FPGA with hardened memory subsystem - Only non-volatile and instant-on mainstream FPGA Microsemi Leadership in Low Power FPGAs - 3X lower static power with no performance penalties - Flash*Freeze real-time power management - 25% lower total power Microsemi Leadership in Reliable FPGAs - Only FPGA with SEU immune fabric configuration cells - Extended temperature support (Up to 125degC Tj) Microsemi Leadership in Secure FPGAs - Built-in state-of-the-art design security for all devices - Easy-to-use!
Features
Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost optimized FPGA markets by providing a LUT based fabric, 5G transceivers, high speed GPIO, block RAM and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to 5X more logic density and 3X more fabric performance than its predecessors and combines a non-volatile Flash based fabric with the highest number of general purpose I/O, 5G SERDES interfaces and PCI Express end points when compared to other products in its classCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMicrochip PIC18-Q43 Family
XProduct SKU: PIC18-Q43
The PIC18-Q43 product family combines our most popular, versatile and easy-to-use Core Independent Peripherals (CIPs) with advanced interconnection capabilities for effortless hardware customization. These microcontrollers (MCUs) are equipped with Direct Memory Access (DMA), Configurable Logic Cells (CLCs), 16-bit PWMs, a 12-bit Analog-to-Digital Converter with Computation (ADCC) and multiple communication interfaces. This combination of peripherals simplifies the creation of customized hardware-based functions, improves system response and reduces the number of external components and code development time. They are well suited for a wide range of real-time control applications including industrial control, consumer, automotive, motor control, capacitive touch sensing and Internet of Things (IoT).
Features
- 64 MHz internal oscillator - Up to 128 KB Flash program memory - 1 KB data EEPROM - Up to 8 KB data SRAM - Six Direct Memory Access (DMA) channels - Three 16-bit dual PWMs provide six PWM outputs - Eight CLCs - 8-bit buffered DAC - 12-bit ADCC with up to 43 channels - Three CWGs - Two analog comparators ZCD - Windowed Watch Dog Timer (WWDT) PPS - Five UART, SPI, and I2C interfaces - Available in 28-, 40-, 44- and 48-pin packagesCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryFrom£2.15(Ex. VAT)
Microchip PIC24F16
XProduct SKU: PIC24FJ16GA002-I/SO-P
PIC24 16-bit Microcontroller, 16 KB Flash Memory, 4 KB RAM, and Advanced Peripherals, 28 Pin Package
Features
CPU Up to 16 MIPS performance 17 x 17 Hardware Multiply, Single Cycle Execution 32-bit x 16-bit Hardware Divider C Compiler Optimized Instruction Set Special Features Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL On-chip LDO Voltage Regulator JTAG Boundary Scan and Flash Memory Program Support Fail-Safe Clock Monitor – allows safe shutdown if clock failsFrom£2.15(Ex. VAT)
135 In stock
Make an EnquiryFrom£2.20(Ex. VAT)
Microchip PIC24F16KA
XProduct SKU: PIC24F16KA102T-I/ML
Enquire for availability
Make an EnquiryFrom£2.59(Ex. VAT)
Microchip PIC24FV16
XProduct SKU: PIC24FV16KA304-I/MV
Enquire for availability
Make an EnquiryMicrochip ProASIC Nano Family
XProduct SKU: A3PN060-VQG100
The ProASIC3 nano nonvolatile FPGAs offer the advantage of being a secure, low power, instant-on,single-chip solution. ProASIC3 nano devices are reprogrammable and offer time-to-market benefits.When measured against the typical project metrics of performance, cost, flexibility and time to market, the ProASIC3 nano devices provide an attractive alternative to ASICs and application-specific standard products (ASSPs) in fast moving or highly competitive markets. ProASIC3 nano devices have up to 3K LEs, supported up to 36 kbits of true dual-port SRAM and up to 71 user I/Os. ProASIC3 nano devices increase the breadth of the ProASIC3 product line by adding new features and packages for greater customer value in high volume consumer, portable, and battery-backed markets.
Features
- Enhanced commercial temperature range - Selectable Schmitt trigger inputs - Hot-swappable and cold-sparing I/Os - Reprogrammable and nonvolatile - 1,024 bits of user flash memory - Single-chip and Instant-ONCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMicrochip-Flashpro SoC Device Programmier
XProduct SKU: FLASHPRO5
The Microsemi FlashPro programming system is a combination of Microsemi FlashPro software and a hardware programmer. Together they provide in-system programming (ISP) for all FPGAs in the IGLOO2, SmartFusion2, RTG4, IGLOO® Series and ProASIC3 Series (including RT ProASIC3), and the SmartFusion, Fusion, ProASICPLUS, and ProASIC families. Flashpro5 is a hardware programmer supporting all SoC FPGA and FPGA devices except ProASICPlus on Windows and SmartFusion2/IGLOO2 devices on Linux Whether you are programming a board containing a single device or multiple devices connected in a chain, you can quickly program and reprogram Microsemi flash FPGAs by connecting to a PC and the target board. FlashPro programmers provide everything you need to program flash FPGAs for compliance with IEEE 1149, using the JTAG port. Click here for more information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMicrochip-ProASIC3 FPGA
XProduct SKU: A3P125-TQG144-P
The ProASIC®3 series of FPGAs, which includes ProASIC3/e, ProASIC3 nano, and ProASIC3L, offers a breakthrough in performance, density, and features for today's most demanding high-volume applications. ProASIC3 devices support the ARM - Cortex-M1 soft processor IP core, offering the benefits of programmability and time-to-market. The ProASIC3 families are based on nonvolatile flash technology and support 100 to 35K LEs and up to 620 I/Os. Military grade devices support 3K to 35K logic elements and 32-bit Cortex M1 soft processor implemented in the FPGA.
Features
- Enhanced commercial temperature range - Selectable Schmitt trigger inputs - Hot-swappable and cold-sparing I/Os - Reprogrammable and nonvolatile - 1,024 bits of user flash memory - Single-chip and Instant-ONCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryMitsubishi MIR8060B1-01
XProduct SKU: MIR8060B1-01
Mitsubishi IR Sensor
Mitsubishi MIR8060B1-01 Mitsubishi's Electric Diode InfraRed sensor (MelDIR) is a thermal sensor for applications in the fields of security, surveillance, crime prevention, people counting, heating, ventilation and air conditioning (HVAC) and smart buildings. MelDIR provides highly detailed thermal images for accurately distinguishing between humans and other heat sources and enables the identification of specific human behavior, such as walking, running or raising hands. It delivers high-pixel, high-thermal-resolution images using thermal diode infrared sensor technology that Mitsubishi Electric developed for the Advanced Land Observing Satellite-2 "DAICHI-2" (ALOS-2). This compact, space-saving sensor has a package which is 80% smaller than that of existing sensors, and provides high-pixel, high-thermal-resolution images with a 10 times higher pixel resolution (80x60 pixels) and five times higher thermal resolution of 100mK, or 0.1 degree Celsius, compared to 16x16 pixel thermopile sensors currently sold in the market. Applications Security, Heating, Ventilation and air conditioning (HVAC) Smart buildingsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryFrom£140.00(Ex. VAT)
NBIOT Wireless Sensor
XProduct SKU: NBIOT-TEMPSENSOR-DEV-KIT-P
Overview coming soon - Call 01527 830800 for information
Features
TEMPERATURE SENSOR Range: -35° to 70°C Accuracy up to 0.25°C in the -20°C to +70°C range and 0.5°C in the -35°C to -20°C range Resolution: 0.1°C Drift: <0.1°C / year Measurement interval: 1 minute to 10 days, configurable Memory size: 60 000 measurements NB-IoT NB-IoT band: 8, 20 3GPP: Release 13 Power: 20 dBm BLUETOOTH LE Radio module frequency: 2,4 GHz Power: 2,5 mW (4 dBm) Range: up to 100 m (LOS) Transmision period: 1 s COMMUNICATION Protocol: CoAP; Trasnsmission interval: 5 minutes - 10 days, configurable SOFTWARE UPDATES Over the air (with delta mechanism); Over Bluetooth Low Energy BATTERY Battery: 2 x AA 3,6 V, capacity 4 200 mAh (replaceable) Battery operating time: up to 10 years DIMENSIONS 27 x 71 x 71 mm Weight: 100 gFrom£140.00(Ex. VAT)
1 In stock
Make an EnquiryOmniVision - OV00000-EG0000xx MIPI Board
XProduct SKU: OV00000-EG000026-P
The GAIA development platform enables the end-user to evaluate multiple OmniVision sensors of various resolutions and develop drivers with ease. It is powered through the USB interface and offers Plug-and-Play capability. The platform consists of three boards. The GAIA FPGA board converts the MIPI to parallel and outputs through USB and serves as the main board for all controls and configurations through the USB interface. This board comes with a CD that has PC tools and instructions. The board has a 100-pin connector with all the required signals to support various camera interfaces. The second board is a sensor transfer/adapter board that converts signals from the 100-pin connector to the camera module specific connector so that the sensor camera module can be plugged in directly. Since there are different camera module connectors, such as the 40-pin Panasonic, the 40-pin Hirose and the 40-pin Samtec connectors, various transfer boards are available. The third board is the camera module board with the OmniVision image sensor on board. Each sensor has its own specific camera module board. The GAIA FPGA board also has an auxiliary USB port that can provide additional power if needed.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry