The LZ7 flat lens emitter contains 6 different colors LED dies closely packed in a low thermal resistance package with integrated glass window. The addition of PC Amber, Cyan and PC Lime to the traditional RGB colors enables richer and wider color combination for more sophisticated color mixing. The compact 3.4mm x 3.4mm LES, low profile package and glass window, allows maximum coupling efficiency into the zoom optics, mixing rods, light pipes and other secondary optics. The high quality materials used in the package are chosen to maximize light output and minimize stresses which results in monumental reliability and lumen maintenance.

Features

Key Features . 6-color surface mount ceramic LED package with integrated flat glass lens . 60W max power dissipation in a small 7.0mm x 7.0mm emitter footprint . Red, Green, Blue, PC Amber, Cyan and PC Lime enables richer and wider color combination for more sophisticated color mixing . Compact 3.4mm x 3.4mm Light Emitting Surface (LES) and low profile package maximize coupling efficiency into secondary optics . Thermal resistance of ~0.9 °C/W . Electrically neutral thermal path . JEDEC Level 1 for Moisture Sensitivity Level . Lead (Pb) free and RoHS compliant Typical Applications . Stage and Studio Lighting . Effect Lighting . Accent Lighting . Display Lighting . Architectural Lighting

SplitStar S32 CW - High Luminance LED The pattern of 16 closely arranged LED chips enables a particularly high luminance of up to 140 cd/mm² (3). This far exceeds the average luminance of CoB (chip-on-board) modules of 20 cd/mm². The multi-chip cold white LED module also scores with a high luminous flux of up to 20,000 lm(3) and an integrated temperature-controlled monitoring (NTC).

Until now the benefits of digital PMR/LMR have been restricted in unlicensed frequency bands due to regulatory restrictions or limited frequency allocations. Operating in the 2.4GHz ISM band the SCT2400 offers a comprehensive solution supporting near global usage without the need for complex licensing. Capable of replacing unlicensed PMR/LMR solutions (FRS/MURS/GMRS/PMR446), the SCT2400 offers a rich set of features supporting not only secure digital voice operation but also wireless data capabilities. The SCT2400 also offers superior operating range over Wi-Fi based digital radio providing up to 30dB of additional sensitivity. Range is further extended using voice coding technology with enhanced error correction that also maintains voice clarity and a high level of voice security under the most demanding RF environments. The internal power amplifier achieves 12.5dBm and an operational range up to 2km. Using an external FEM to achieve 100mW output power and -123dBm sensitivity, increases operational range to greater than 12km line of site. In comparison to other licensed and unlicensed PMR solutions the SCT2400 operates on a fraction of the power in both receive and transmit, enabling significantly longer operating times or the use of smaller batteries that allows innovative small form factor solutions to be realised. In addition to LMR/PMR the SCT2400 offers a low power, cost effective solution for all applications requiring digital voice or long range data transmission. Features - Highly integrated 2.4GHz spread spectrum radio transceiver - Range optimised vocoder - Digital voice modes - Peer to peer - Group Call - Broadcast - Data Modes - Continuous SMS style data Technical Features - 12.5dBm RF Tx power - Single 3V supply - Low power consumption - ~10mA standby/scanning - ~52mA receive voice - ~64mA transmit voice - 144-BGA package (10mm x 10mm) Applications - License Free 2.4GHz Voice + Data - Intercoms - Access control and gate entry - Two-way radio, PMR/LMR - Wearable communications - Wireless headsets

High performance cellular router with dual redundant communications for complex transit and transportation systems. Ideal for challenging transportation and mobile environments, Digi TransPort® WR64 is a dual cellular LTE-Advanced router with true enterprise class routing, security, firewall and integrated VPN. It offers a flexible interface design with an integrated Wi-Fi access point, USB, serial and 4-port Ethernet switch, as well as a variety of configuration options including GNSS and Bluetooth. Internet access for riders is managed securely and without impact to onboard bus systems. Triple carrier aggregation on each cellular interface can be combined to deliver up to 1.2 Gbps to passengers. Onboard systems retain priority and any remaining bandwidth is made available to Internet traffic.

Features

FEATURES AND BENEFITS – Segmented private vs. public data communication across dual 600 Mbps CAT 11 cellular modules – Video and vehicle data offload over 1.7 Gbps 802.11ac Wi-Fi backhaul – Passenger Wi-Fi over 867 Mbps 802.11ac access point – Wired Gigabit Ethernet (4-port) for onboard systems – Future-built with powerful quad-core 1.91GHz, 64-bit CPU – Manage and control devices with Digi Remote Manager®, a web-based management tool for all Digi cellular routers and gateways – Cryptographic Co-processor with Secure Key Generation and Storage

Quectel EG25-G is a LTE Cat 4 module offering worldwide coverage and optimized specially for M2M and IoT applications. Adopting the 3GPP Rel. 11 LTE technology, it delivers 150Mbps downlink and 50Mbps uplink data rates. A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB serial drivers for Windows 7/8/8.1/10, Linux, Android/eCall) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance, and digital signage. Key Benefits - LTE Cat 4 module optimized for M2M and IoT applications - Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage - Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment - Feature refinements: supports DFOTA*, eCall and DTMF - MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

Microsemi extends its non-volatile FPGA leadership with the PolarFire family of cost-optimized FPGAs. PolarFire FPGAs deliver up to 50% lower power than equivalent SRAM FPGAs. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT markets Cost-optimized Architecture •Architecture and process optimizations for 100K/500K LE devices •Transceiver performance optimized for 12.7 Gbps, which yields smaller size •1.6 Gbps I/Os—hardened I/O gearing logic with CDR (supports SGMII/GbE links on these GPIOs) •Best-in-class high-performance, hardened security IP in mid-range devices Power Optimization •The lowest static power—1/10 static power vs. competing devices •Transceiver optimized for 12.7 Gbps, which yields 1/2 the power vs. competing devices •Low power Flash*Freeze mode yields best-in-class standby power •Integrated hard IP—DDR PHY, PCIe endpoint/root port, crypto processor •Total power (static and dynamic)—up to 50% lower power

Microsemi's IGLOO®2 FPGAs, targeted at the cost-optimized FPGA market, integrate fourth generation flash-based FPGA fabric and high performance communications interfaces on a single chip. The IGLOO2 FPGAs offer a cost optimized FPGA with best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry. Best-In-Class: Integration, Power, Reliability & Security Microsemi Leadership in Cost-Optimized FPGAs - Highest number of 5G transceivers - Highest number of GPIO - Highest number of PCI Compliant 3.3V I/O - Only FPGA with hardened memory subsystem - Only non-volatile and instant-on mainstream FPGA Microsemi Leadership in Low Power FPGAs - 3X lower static power with no performance penalties - Flash*Freeze real-time power management - 25% lower total power Microsemi Leadership in Reliable FPGAs - Only FPGA with SEU immune fabric configuration cells - Extended temperature support (Up to 125degC Tj) Microsemi Leadership in Secure FPGAs - Built-in state-of-the-art design security for all devices - Easy-to-use!

Features

Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost optimized FPGA markets by providing a LUT based fabric, 5G transceivers, high speed GPIO, block RAM and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to 5X more logic density and 3X more fabric performance than its predecessors and combines a non-volatile Flash based fabric with the highest number of general purpose I/O, 5G SERDES interfaces and PCI Express end points when compared to other products in its class

Overview coming soon - Call 01527 830800 for information

ConnectCore for i.MX6UL

The Industry’s smallest wireless low-power NXP i.MX6UL System-on-Module platform to build your intelligent andstrongsecure connected devices The ConnectCore® for i.MX6UL module delivers a secure and extremely cost-effective connected System-on-Module platform that is slightly bigger than a postage stamp. Its patent-pending Digi SMTplus™ surface mount form factor allows you to choose simplified design integration leveraging proven and easy-to-use edge-castellated SMT technology, or a versatile LGA option for ultimate design flexibility with access to virtually all interfaces. Built on the NXP i.MX6UL application processor, the module is the intelligent communication engine for today’s secure connected devices. It seamlessly integrates dual-Ethernet and pre-certified dual-band Wi-Fi (802.11a/b/g/n/ac) with Bluetooth 4.2 connectivity. Embedded device security is a critical design aspect for the growing number of connected applications (“IoT”) and the ConnectCore for i.MX6UL removes the implementation barriers by providing you with Digi TrustFence, a fully integrated secure module platform with complete Linux software support.

Features

- Stamp-sized, secure, connected System-on-Module platform - NXP i.MX6UL-2, Cortex-A7 @ 528 MHz - Up to 2 GB NAND flash, up to 1 GB DDR3 - Patent-pending low-profile Digi SMTplus™ form factor - ntegrated Microcontroller Assist™ for 30 µA ultra-low power modes - Pre-certified 802.11a/b/g/n/ac + Bluetooth 4.2 option - Integrated dual 10/100 Ethernet connectivity - Exclusive Digi TrustFence™ embedded device security framework - Turnkey and royalty-free embedded Linux software platform - Industrial operating temperature and reliability

Specifications

CC-WMX-JN58-NE	i.MX6UL-2, 528 MHz, Industrial Temp,  256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.1
CC-MX-JN58-Z1	i.MX6UL-2, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet
CC-WMX6UL-START	ConnectCore for i.MX6UL Starter Board, 87 x 63 mm, Industrial temp, 256 MB SLC NAND, 256 MB DDR3, single 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, PCB antenna, USB , UART, microSD, Pi HAT and Grove connectors, power (USB + header), and accessories
CC-WMX6UL-KIT	ConnectCore for i.MX6UL SBC, Pico-ITX (100 x 72 mm), Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, XBee socket, cellular connectivity support via PCI Express Mini Card, SIM, NFC, microSD, USB Host, USB OTG, UART, DualCAN, SPI, I2C, LVDS, camera, antenna connector, battery connector, power supply, and accessories