Unigraf
24 Results
Unigraf - DPA-400 DP Aux Channel monitor
XProduct SKU: DPA400 2.0
DPA-400 and its AUX Channel Monitor user interface (GUI) provides a compact, pocket-sized tool for recording and analyzing DisplayPort AUX channel traffic. It enables the user to monitor, capture, and document all AUX Channel transactions over a DisplayPort link. AUX Channel Monitor GUI detects, timestamps, and parses all DisplayPort Configuration Data (DPCD) reads and writes, Multistream (MST) Sideband Channel Communication, and EDID reads. The GUI is able to parse DPCD registers for DP versions up to 2.0. It decodes HDCP 1.3 and 2.3 messages and DP Sideband Channel Communication messages. The activity of the Hot Plug Detect (HPD) signal and optional user-defined input signals will also be tracked and time-stamped. Unigraf’s AUX Channel Monitor is a mandatory tool for any engineer that wants to verify and/or debug Compliance Tests and Interoperability Test results. By analyzing the details of the source-sink interaction, the designer is able to fully confirm the behavior of both parties. When the content of each read and write are available in detail, there will be no room for guessing.
Features
* Compatible with all DP versions * Device-independent * Data interpreter with time stamps * Detect and parse all DPCD locations * Decode the Sideband CH Communication messages * Pocket size * USB controlled and powered Applications * Silicon validation * Software debug and validation * Resolve interoperability problems * Monitoring and time measurement of eventsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPR-120 DP1.2 test device
XProduct SKU: DPR-120
DPR-120 is a fully-featured DisplayPort™ 1.2 compliant Reference Sink. Verify DisplayPort interfaces up to 4K@60Hz. It provides all features needed for testing DP Multistream (MST) source devices like PC display cards or portable computers. The Debug and Test Controller GUI is the user interface of DPR-120. It provides the user with a multitude of valuable tools for monitoring the performance of the DUT. VESA has certified DPR-120 as the Authorized Test tool for testing Link layer CTS 1.2 Core and Extension Set 1 revision 1.1. Unigraf’s DPR-120 DisplayPort Reference Sink is an Authorized Test Tool for DP 1.2 Link Core and Link Ext1 CTS tests for testing DisplayPort source devices. DPR-120 Debug and Test Controller SW (DTC) is the graphical user interface (GUI) for controlling the DP 1.2 Link CTS tests with DPR-120 Reference Sink. DPR-120 DTC also has many powerful debug features for monitoring the status of the tested unit (DUT) and the test procedure.
Features
* Compact sized DisplayPortTM 1.2 compliant Reference Sink * HBR2 & MST capable Sink and Branch device * Certified as the platform for DP 1.2 LL CTS Ext1 tests * Optional MST Debug panel & AUX Channel Monitor * Debug and Test Controller GUI enables monitoring and previewing any MST stream * User programmable EDID and DPCDSpecifications
Available Options Test Automation: * DPR-120 MST Debug Extension * DPR-120 Test Automation Shell Software DP Link Layer Compliance Testing: * DisplayPort Link Layer CTS Ext1 and Core, Set A+B+C * DisplayPort RefSink Link Layer CTS Upgrade from A+B to A+B+C * DisplayPort RefSink Reduced Lane Count test, Set DCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPR100 DisplayPort Reference Sink
XProduct SKU: DPR100
DPR-100 is a compact-sized and easy to use platform for Audio and HDCP compliance tests of DisplayPort Source devices. It provides all features needed for testing DisplayPort source devices like PC display cards or portable computers. It serves also as an AUX Controller for PHY CTS test automation. The DPR-100 allows you to monitor all aspects of the DP interface like Link and HDCP status and MSA. You can manually read and set DPR-100 DPCD, sink capabilities, issue varying HPD pulses etc. The Sink Console GUI also includes an advanced EDID parser for viewing and reprogramming its EDID information.
Features
* Compact sized DisplayPort Sink * Sink Console GUI enables full monitoring of the * DP interface * Certified for HDCP CTS * AUX controller for PHY CTS * USB controlled and poweredSpecifications
Available Options DP HDCP 1.3 Compliance Testing: * DisplayPort RefSink HDCP 1.3 CTS * DisplayPort RefSink Extension HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort AUX RefSink Controller * DisplayPort AUX RefSink Controller Upgrade for HBR3 * DisplayPort RefSink Audio CTSCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - DPT-200 DisplayPort Ref Source
XProduct SKU: DPT200
The DPT-200 is a fully-featured and easy to use DisplayPort source for development, debug and production line testing of DP controlled flat panel display modules, monitors and TV sets. DPT-200 is fully compatible with Unigraf DP RefSource CTS tools. DPT-200 is a hardware platform for HDCP compliance tests. It serves also as an AUX Controller for PHY CTS test automation. The DPT-200 allows you to monitor all aspects of the DP interface like Link and HDCP status, sink EDID and DPCD. You can also manually set DPCD, Link Parameters, Output Level Timing and Pattern used. The Source Console GUI also includes an advanced EDID editor and programmer for changing the sink EDID information. The DPT-200 allows you to easily perform tasks that are not possible with normal DP source devices. In addition to the Source Console GUI, you can use the Production Test Command set to interface DPT-200 to your automated production system.
Features
* Source Console GUI enables full monitoring and control of the DP interface * Manual and automatic link training * Manually settable output levels * Read and write EDID and DPCD * True Color patterns * Audio feed through * Controlled via USB or keypadSpecifications
Available Options: S/W to enable: DP HDCP 1.3 Compliance Testing: * DisplayPort RefSource HDCP 1.3 CTS SW * DisplayPort RefSource EXT HDCP 1.3 CTS PHY Compliance Testing: * DisplayPort RefSource AUX ControllerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-1 MLC LVDS frame grabber box
XProduct SKU: UCD-1 MLC
UCD-1 MLC is a frame grabber that can capture four (4) 6-lane mini-LVDS channels. It enables automated testing of TFT LCD module T-Con boards, T-Con chips and TV Main Boards with mini-LVDS output. Multiple signaling schemes can be configured to make testing of various mini-LVDS bus signaling types easy and straightforward.
Features
* Compact, USB connected device * Captures 4 parallel mini-LVDS channels with 6 data lanes * Easy to use Software System Development Kit (SDK) for Windows and Linux * Configuration data for compatibility with various mini-LVDS typesCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-1 QLV Quad-LVDS frame grabber box
XProduct SKU: UCD-1 QLV
UCD-1 QLV is a frame grabber that can capture four (4) parallel LVDS channels. It enables automated testing of LCD TV main boards with Quad LVDS output. The used link configuration, color depth and pixel mapping is defined with configuration data.
Features
* Compact, USB connected device * Captures 4 parallel LVDS channels * VESA and JEIDA color modes with 18 to 36 bits per pixel * Easy to use Software System Development Kit (SDK) for WindowsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-2 VbyOne frame grabber box
XProduct SKU: UCD-2 VX1
UCD series is a family of compact-sized capture devices utilizing the USB interface. They provide a flexible and robust way of image capture in automated testing of display related ASICs and display electronics. The dedicated hardware and the easy to apply SW library provide an optimal platform for creating sensitive but short cycle time routines for test systems.
Features
* Compact, USB connected device * Captures 4 to 8 parallel V-by-One data lanes * 16 lanes with two and 32 lanes with four synchronized units * Up to 30 bit color depth * Easy to use SW SDK for Windows and LinuxCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-240 4K video production test box
XProduct SKU: UCD240
UCD-240 is a cost-effective and flexible Test Automation tool for testing USB Type-C products in the production line environment. UCD-240 is a fully-featured Test Automation tool supporting DP Alt Mode, 4K@60Hz and NI TestStand. UCD-240 is easy-to-use and its test coverage includes all essential features of the USB-C interface.
Features
*Automated tests for USB-C™ DisplayPort™ Alt Mode *Electrical Test to verify whole USB-C connector with single cable insert *Test USB 2.0 and USB 3.0 *4K@60Hz support *Easily set test parameters with provided Software *Easily run tests from the command-line *Unigraf’s Test System Interface (TSI) Support *Third Part Test Management Software Support e.g. NI TestStand SupportSpecifications
Optional extras: HARDWARE: *UCD-240 USB-C DP Alt Mode Tester (Dual Port Option) R&D DEBUGGING: *USB-C External Power Test UnitCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-301 4K HDMI & DP Analyser
XProduct SKU: UCD301
UCD-301 is a UHD / 4K@60Hz compliant video capture unit for testing DisplayPort™ and HDMI Sources. UCD-301 enables testing all aspects of HDMI 2.0 and DP 1.4a with HBR2 max bit rate capability. UCD-301 is a DCP approved test tool for HDCP 2.3 compliance testing of DisplayPort transmitters.
Features
Electrical Tests With UCD-301 Digital, the tester can verify the electrical continuity of each signal in the HDMI and DisplayPort interface. The TSI test automation routine allows the calling application to set the target limits. TSI provides the result through ‘Pass / Fail’ indication with the actual measured value. includes UCD Console The UCD-301 graphical user interface for R&D debugging is called UCD Console. It provides the user with a flexible way of navigating between the interface based Roles of the device and the functionalities of each Role. UCD Console features preview windows for the received video and audio, monitoring and controls for the USB-C connection parameters, DP link parameters, and an EDID editor. UCD Console also provides the status and control of the HDCP functionSpecifications
Available Options: *UCD Console Pro for testing DP Source DUT *UCD Console Pro for testing HDMI Source DUT *HDCP 2.3 Support *DP HDCP 2.3 Compliance Testing *DP HDCP 2.3 CTS Test Set for Testing Transmitter DUT *TSI SDK Advanced Test Set *TSI SDK Advanced Test Set with HDCP 2.3 Support *TSI Electrical Test SetCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-400 8K DP generator & analyser
XProduct SKU: UCD-400
UCD-400 is an HBR3 capable 8K video generator and analyzer. With UCD-400 you can verify DisplayPort™ interfaces up to 8K@30 Hz (8K@60 Hz with DSC) and 4K@120 Hz video modes. The unit supports FEC, DSC, and LTTPR. UCD-400 is approved as an official DP 1.4a Link Layer including DSC and HDCP 2.3 compliance test tool.
Features
Reliable Compliance Testing Tool: DP 1.4a Link Layer, DSC and HDCP 2.3 CTS UCD-400 is a VESA Certified DP 1.4a Link Layer Compliance Test Tool for Sinks, Sources and Branches. UCD-400 is also a DCP LLC Approved Test Tool for HDCP 2.3 Compliance Testing of Transmitters, Receivers and Repeaters on the DisplayPort interface. VESA requires Link Layer and HDCP testing as part of the DisplayPort testing requirement for certification. If a DisplayPort receiver or transmitter supports HDCP (as reported in the product CDF) it shall be tested as part of the certification requirements for obtaining the DisplayPort Logo. (Source: VESA)Specifications
Available Options: DP HDCP 2.3 COMPLIANCE TESTING: * DP HDCP 2.3 CTS Test Set for Testing Transmitter DUT. * DP HDCP 2.3 CTS Test Set for Testing Receiver DUT * DP HDCP 2.3 CTS for DP Transmitter, Receiver and Repeater DUT DP LINK LAYER COMPLIANCE TESTING * DP 1.4a Link Layer CTS for Sink DUT * DP 1.4a Link Layer CTS for Source DUT * DP 1.4 DSC CTS for testing Sink DUT * DP 1.4 DSC CTS for testing Source DUT * DP 1.4 DSC CTS for testing Source and Sink DUT DisplayID / EDID CTS for testing Source DUT DisplayID / EDID CTS for testing Sink DUTCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-422 HDMI2.1 10K Video Generator and Analyser
XProduct SKU: UCD-422
UCD-422 is a video generator and analyzer for testing HDMI 2.1 interface up to 10K video modes. Resolutions supported are 4K@120Hz, 8K@60Hz and 10K@30Hz with uncompressed video. UCD-422 offers support for FEC, DSC Sink & Source, and eARC. HDCP 1.4 and HDCP 2.3 are also supported.
Features
Fixed Rate Link (FRL) is the link data transfer method introduced in HDMI 2.1. FRL replaces the current TMDS but HDMI 2.1 specification still requires support for TMDS for backwards compatibility with billions of HDMI 1.4b and 2.0 devices in the world. (Source: HDMI) The UCD-422 can identify interoperability issues on FRL capable source and sink devices. Users can verify if an image is captured correctly on the UCD Console when testing source devices using different FRL modes. Check any FRL rate such as 3 Gb/s, 6 Gb/s, 8 Gb/s, 10 Gb/s and 12 Gb/s. Conduct link training to check if your sink or source is capable of transmitting video at different timings through TMDS/FRL.Specifications
HDMI 2.1 Test Equipment (FRL/TMDS) * 8K@60Hz support * 12 Gbps/channel * Simultaneous Generator & Analyzer * Enhanced Gaming Features: VRR, ALLM * HDCP 1.4 and 2.3 support * eARC support * DSC supportCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-451 DP 1.4a Dolby Vision 8K generator
XProduct SKU: UCD-451
UCD-451 (P/N: 066617) is a video generator for testing Dolby Vision on DisplayPort™ 1.4a sink devices with HBR3 max bit rate capability. Resolutions supported: 8K@30 Hz and 4K@120 and Hz 8K@60 Hz (with DSC) DP 1.4a Link Layer CTS Tool for Sinks* HDCP 2.2/2.3 CTS Tool for Transmitters* Support for DSC, FEC, LTTPR, and MST (4 streams) USB-C output with supplied converter *Contact Unigraf for availability HDR Testing Extended 32 GB memory enables verifying 8K Dolby Vision content Any video format, audio format, frame rate, video timing, and infoframes including timestamps. There are no restrictions on the output of video format
Features
* DP 1.4a Test Equipment * 8K Dolby Vision Test Tool * Extended Memory 32 GBs * Embedded PC * 8K and 4K Reference DP Source * DP 1.4a features: * HBR3 output * MST support (4 streams) * DSC, FEC, and LTTPR support * USB-C output with supplied converterCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-452 HDMI2.1 Dolby Vision 10K generator
XProduct SKU: UCD-452
UCD-452 (P/N: 066615) is a Dolby Vision Test Tool and 10K Video Generator for testing HDMI 2.1 sink devices up to 10K video modes. FRL/TMDS support Resolutions supported: 4K@120Hz, 8K@60Hz, 10K@30Hz, 10K@60Hz (with DSC) Support for FEC, DSC and eARC. Support for HDCP 1.4 and HDCP 2.2/2.3 Enhanced gaming features: VRR and ALLM. HDR Testing Extended 32GB memory enables playing back 8K Dolby Vision™ content. Any video format, audio format, frame rate, video timing, and infoframes can be played No restrictions on the output of video formats.
Features
* HDMI 2.1 Test Equipment (FRL/TMDS) * 8K Dolby Vision™ Test Tool * Extended Memory 32GB * Embedded Windows PC * Variable Refresh Rate (VRR) * Auto Low Latency Mode (ALLM) * Forward Error Correction (FEC) * HDCP 1.4 & HDCP 2.2/2.3 Support * DSC Support * eARC SupportCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD-500 DP 2.0 16Kgenerator & analyser
XProduct SKU: UCD-500 GEN 2
UCD-500 is a DisplayPort™ 2.0 Video Generator and Analyzer unit for testing DisplayPort Sinks and Sources up to 8K@60Hz and 16K@60 Hz (with DSC) video modes with UHBR 20 Max Bit Rate Capability. 10 Gb rate max capability for DP 2.0 connectors, due to current DP 2.0 implementation, and 20 Gb rate max capability for USC-C connectors. UCD-500 offers support for Panel Replay, Adaptive Sync, DSC, FEC and LTTPR.
Features
* 16K Video Generator & Analyzer * 8K@60Hz without compression * 16K@60Hz with DSC * DP 2.0 Link Layer CTS * DP 2.0 Link Layer CTS will be added when VESA released compliance test specification HDCP 2.3 CTS for receivers, transmitters and repeaters * Support for Panel Replay, Adaptive Sync,DSC, FEC and LTTPR * Color depth 6 to 16bpc * Color formats: RGB, YCbCr 444, 422, 420, Raw * Capture memory 32GBCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD323 HDMI/DP 4K video generator/analyser
XProduct SKU: UCD323HDDP4G
The UCD-323 is a fully-featured R&D debug tool for testing all aspects of HDMI 2.0 and DisplayPort 1.2 with HBR2 max bit rate capability. The UCD-323 combines Reference Source and Reference Sink functionality in one unit. The UCD-323 is a DCP LLC Approved Test Tool for HDCP 2.3 CTS Tests on DisplayPort Transmitters and Receivers devices. The UCD-323 is delivered with ready-made test sets that are configured and able to run via easy-to-use PC GUI called UCD Console. All tests can be automated for compliance testing, R&D debugging, and production line testing.
Features
*Approved Dolby Vision Compatibility Test Tool *Reliable Compliance Testing Tool *Platform for Test Automation *UCD Console software *UHD / 4K compliant test equipment *HDMI 2.0 and DP 1.2 input and output in one unit *DCP approved HDCP 2.3 CTS Test Tool *HDCP 1.3 and HDCP 2.3 support *Sink and source video, audio and configuration parameters *USB 3.0 connectedSpecifications
optional extras: R&D DEBUGGING: *UCD Console Pro for testing DP Source DUT *UCD Console Pro for testing DP Sink DUT *UCD Console Pro for testing HDMI Source DUT *UCD Console Pro for testing HDMI Sink DUT *HDCP 2.3 Support *DP HDCP 2.3 Compliance Testing *DP HDCP 2.3 CTS Test Set for Testing Transmitter DUT *DP HDCP 2.3 CTS Test Set for Testing Receiver DUT TEST AUTOMATION: *TSI SDK Advanced Test Set *TSI SDK Advanced Test Set with HDCP 2.3 Support DOLBY VISION: *Dolby Vision Test Kit for testing HDMI Source devices *Dolby Vision Test Kit for testing HDMI SINK devices *Dolby Vision Test Kit for testing HDMI Source and Sink devices *Dolby Vision Test Kit for testing DP Source devices *Dolby Vision Test Kit for testing DP Monitors *Dolby Vision Test Kit for testing DP Source and Monitor devices PHY COMPLIANCE TESTING: *UCD-323 Gen 2 • DP Reference Sink AUX Controller *UCD-323 Gen 2 • DP Reference Source AUX ControllerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UCD340 USB-C DP Alt mode Video Analyser and Generator
XProduct SKU: UCD340
UCD-340 is a 4K USB-C DP Alt Mode video analyzer and generator. With UCD-340 you can verify USB-C DP Alt Mode Sinks and Sources up to 4K@60Hz resolution. UCD-340 features a versatile and reliable way of testing video, audio, DisplayPort Alt Mode features, power delivery functions and connector pins of the USB-C interface. UCD-340 is the only DCP LLC Approved Test Tool for HDCP 2.3 CTS testing on USB-C DP Alt Mode Transmitter and Receiver devices. UCD-340 is controlled via easy-to-use PC GUI called UCD Console. All tests can be automated for compliance testing, R&D debugging and production line testing.
Features
* 4K@60 Hz Video Analyzer & Generator * Test USB-C DP Alt Mode Video and Audio * Test USB-C Power Delivery * DCP LLC Approved HDCP 2.3 CTS Test Tool * Test connector pins with SW based cable flip * All tests can be automated * USB signal pass-thruSpecifications
Optional extras: R&D DEBUGGING: * USB-C External Power Test Unit * UCD Console Pro for testing USB-C Sink DUT * UCD Console Pro for testing USB-C Source DUT HDCP 2.3 SUPPORT * DP HDCP 2.3 Compliance Testing * DP HDCP 2.3 CTS Test Set for Testing Transmitter DUT * DP HDCP 2.3 CTS Test Set for Testing Receiver DUT TEST AUTOMATION: * TSI SDK Advanced Test Set * TSI SDK Advanced Test Set with HDCP 2.3 SupportCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UFG-04 LVDS frame grabber
XProduct SKU: UFG-04 LVDS
UFG-04 LVDS is an optimal tool for testing the fidelity of input and scaler units for flat-panel TVs and monitors. UFG-04 LVDS input directly matches the LVDS output of a flat panel LCD and PDP monitor controller. The capture board replaces the actual display for testing. The flexible design of the internal data handling enables custom data input configurations and conversions UFG04 Console SW is an easy tool for previewing the captured content, ensuring the signal integrity and controlling the features of the board. With the included SDK the application designer can effectively integrate the UFG-04 LVDS as a part of an automated functional testing system.
Features
* Captures images from High Definition LVDS video * 135 MHz Dual FPD-Link Receiver * 270 MPix/s maximum * Full 30 bits per pixel color depth * Compact half-size PCI card * High-speed PCI-express bus * 512 MPixels onboard capture buffer * Sustained PCI bus data transfer speed up to 140 MBytes/s.CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Unigraf - UFG-04 LVDS quad frame grabber
XProduct SKU: UFG-04 LVDS QUAD
UFG-04 LVDS is an optimal tool for testing the functionality of TV main boards scaler boards or even TCON boards. The capture card replaces the flat panel module for the testing. The board is compatible will all LVDS data configurations resolutions, screen sizes and timings. The flexible design of the internal data handling enables custom data input configurations and advanced on-board image functions. Two Boards, Four Channels
Features
* Captures images from High Definition LVDS sources * 4 channels 1080p @120 Hz capture * Optionally 8 channels 1080p @ 240 Hz capture * 10 bits per color * Two (optionally four) synchronized PCIe cards * Up to 500 continuous 1080p framesCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry